Read Harman Kardon HK 3250 (serv.man4) User Guide / Operation Manual online
RECALLING THE PRESET
STATIONS
STATIONS
Select the channel number of the
desired preset station with the UP or
DOWN TUNE/PRESET or NUMERIC
buttons on the remote control unit.
desired preset station with the UP or
DOWN TUNE/PRESET or NUMERIC
buttons on the remote control unit.
SCANNING THE PRESET
STATIONS IN SEQUENCE
STATIONS IN SEQUENCE
1 Press the PRESET SCAN button
on the remote control unit to listen
to the preset stations.
to the preset stations.
2 The receiver will start scanning the
stations in the preset sequence
and each station is received for 4
seconds.
and each station is received for 4
seconds.
3 At the desired station, press again
to stop scanning.
NOTES:
• If the end of the frequency range is
• If the end of the frequency range is
reached during the auto or manual
tuning, tuning will continue from the
opposite end.
tuning, tuning will continue from the
opposite end.
• When FM stereo broadcasts are
poor, select the FM mono mode
with the SEEK/STEREO button so
that the AUTO indicator goes out.
with the SEEK/STEREO button so
that the AUTO indicator goes out.
• When memorizing a new station,
the previously memorized station
on the same channel number is
cleared.
on the same channel number is
cleared.
• In the event of a power failure or
when the receiver is disconnected
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.
RECORDING WITH A
CASSETTE DECK
CASSETTE DECK
1 Select the program source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
FUNCTION SELECTOR buttons.
2 Start recording on the cassette
deck.
3 Play back the desired program
source.
• The volume, balance, bass and
• The volume, balance, bass and
treble settings have no effect on
the recording or dubbing.
the recording or dubbing.
• When recording is performed on
a 3-head cassette deck, the
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
8
ENGLISH
HK3250 engelsk 11/01/98 14:28 Side 8
Click on the first or last page to see other HK 3250 (serv.man4) service manuals if exist.