HD 990 (serv.man4) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 25

Read Harman Kardon HD 990 (serv.man4) EMC - CB Certificate online

 
                                                                                Page 24 of 51                              Report No. SH08090331-002 
IEC/EN 60065 
Clause 
Requirement – Test 
Result - Remark 
Verdict 
 
TRF No:  IEC/EN 60065H 
 
       TRF originator Intertek ETL SEMKO SH 
 
 
DK: mains socket-outlets with earthing contact 
shall comply with Heavy Current Regulations 
Section 107-2-D1, Standard Sheet DK 1-3a, 
DK 1-5a or DK 1-7a 
           
N/A 
 
GB: equipment fitted with a flexible cable or cord 
provided with a 13A BS 1363 plug as in Statutory 
Instrument 1768:94 
 
Pass 
 
IE: equipment fitted with a flexible cable or cord 
provided with a 13 A plug in accordance with 
Statutory Instrument 525:97 
           
Pass 
 
NO: mains socket-outlets on Class II equipment meet CEE Publication 7 with the 
following amendments: 
N/A 
 
- dimensions 2,5 A, 250 V socket-outlets shall 
comply with Standard Sheet 1 page 132 of 
EN 60 065:98 
           
N/A 
 
- mechanical strength 2,5 A, 250 V socket-outlets 
tested as specified in EN 60 065, 12.1.3 
           
N/A 
 
- protecting rim also tested 
           
N/A 
 
NO: method b) of 8.1 is not permitted. Double or 
reinforced insulation is required between parts 
connected to the mains and parts connected to the 
public telecommunications network 
           
N/A 
J.2 
NO: In Norway, due to IT power distribution system 
used, the a.c. MAINS supply voltage is considered 
to be equal to the line-to-line voltage, and will 
remain 230V in case of a single earth fault. 
 
N/A 
 
 
ZC 
ANNEX ZC TO EN 60 065, A-DEVIATIONS 
 
DE: additional markings required in German language: 
 
 
- cathode ray tubes with an accelerating voltage 
between 20 kV and 30 kV (marking on the tube) 
No CRT used. 
N/A 
 
- TV receivers whose picture tube has an 
accelerating voltage between 20 kV and 30 kV 
           
N/A 
 
- TV receivers whose picture tube has an 
accelerating voltage greater than 30 kV 
           
N/A 
 
- TV receivers whose picture tube has an 
accelerating voltage less than 20 kV 
           
N/A 
5.1 
IT: additional markings on the outside of the TV 
receiver in Italian language 
           
N/A 
 
IT: user instructions in Italian language including a 
conformity declaration 
           
N/A 
 
IT: certification number on the back cover 
           
N/A 
Page of 52
Display

Click on the first or last page to see other HD 990 (serv.man4) service manuals if exist.