HD 990 (serv.man3) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 41

 

                                                                                Page 39 of 55                              Report No. SH08090331-001 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

     TRF originator Intertek ETL SEMKO SH 

 

 

 

 

 

 

, whenever the words “white pine board” appear, insert 

the words “or plywood board” to it. 

Pass 

 

SS 143 Amendment No.1 and No. 2 

 

4.1.3 

Delete “45 % to 75 %” and insert “65 _ 5 %”. 

75% maximum in IEC 
60065:2001 

Pass 

7.1 

Resistance to heat without external forces 
Adopt the temperature specified for the tropical 
conditions. 

 Pass 

 9.3.4 

Delete the note “A Quality Assessment System 
for capacitors complying with Subclause 14.2 is 
under consideration in the IEC”. 

This is not in IEC 60065:2001. 

Pass 

10.2 

Humidity treatment 
Adopt the testing conditions designed for tropical 
conditions. 

120h at a relative humidity of 
93%, ambient temperature 
40

o

C 

Pass 

16 

External flexible cords 
Delete “IEC Publication 227: Polyvinyl Cloride 
Insulated Cables of Rated Voltages up to and 
Including 450/750 V and IEC Publication 245: 
Rubber Insulated Cables of Rated Voltage up to 
and including 450/750V” and insert “Singapore 
Standard 236: Flexible Cords”, whenever they 
appear in this clause. 
Delete “CEE Publication 13, CEE Publication 2 
and IEC Publication 173: Colours of the Cores of 
Flexible Cables and Cords” whenever they 
appear in this clause. 

 Pass 

16.2 

Delete the notes in small print and insert “A 
nominal cross-sectional area of 0.75 mm

2

 will 

satisfy this requirement”. 

 Pass 

16.4b 

Delete “Subclause 3.1 of IEC Publication 227-2: 
Part 2: Test Methods” and insert “Subclause 9.1 
of SS 236”: 
9.1 Flexing Test (except for tinsel cords, twisted 
twin and single core cords). 
The test shall be carried out by mieans of the 
apparatus shown in Figure 5. This apparatus has 
a carrier C supporting two pulleys A and B 
arranged so that the cord is horizontal between 
the pulleys. The carrier moves backward and 
forward over a distance of 1 m at an 
approximately constant speed of 0.33 m/s. 
A sample of flexible cord fabout 5 m long shall be 
stretched over the pulleys as shown in the figure, 
each end being loaded with a weight. The weight 
and the diameter of the pulleys A and B shall be 
as given in Table 1. 
Screene cords in accordance with Table 7 shall 

 Pass