HD 755 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 14

14 REPEAT PLAY OPERATION

The HD 755’s programming system enables you
to repeat either a single track, the entire disc
(respectively all programmed tracks) or a
specially programmed passage that you select.

Repeat One Track
To repeat the track in play, press the Repeat
button !

5 once. When the unit is in Stop

mode, press Repeat once, select the track to be
repeated with the Skip or Numeric buttons as
described on page 10, and press Play 4

9.

The REPEAT and 1 indicators will light and the
track will continue to play over and over again
continuously. If the track is changed by pressing
the Skip buttons 7

7 while the Repeat func-

tion is in use, the newly selected track will be
repeated. To stop the repeat play, press the
Stop button 5

A or press the Repeat but-

ton !

5 until the REPEAT indicator goes out.

Repeat All Tracks
To repeat all of the tracks on a disc, press the
Repeat button !

5 until the REPEAT and

ALL

indicators light up. When you see these indi-

cators, the entire disc or all programmed tracks
will play through to the end, and then start
again from the beginning. The disc will play
continually until the Stop button 5

A is

pressed.

Repeat A–B
The HD 755 may be programmed to repeat any
section within a track, or a complete passage or
program that includes material in a series of
tracks.

To program the unit for A–B play, first locate the
point on the disc where you wish to begin the
repeated section. At that point, press the Repeat
A–B button 

6. The REPEAT indicators will light

in the Information Display and an A– indica-
tor to show that the program process has
started. Let the disc continue to play or press the
Search — button 6

8 or Skip fl·

button 7

7 on the front or remote until you

have reached the end of the section to be
repeated. When the end point is reached, press
the Repeat A–B button 

6 again. Note that

the REPEAT and A–B indicators will now be
illuminated.

Once the Repeat A–B button 

6 is pressed

for the second time to complete the program-
ming, the HD 755 will automatically go to the
beginning of the selected passage and continue
to play the section over and over.

To resume normal play press the Repeat A–B
button 

6 again. The REPEAT and A–B indica-

tors will go out, and the rest of the disc will play
normally.

IMPORTANT Note: Tracks programmed as
described before in chapter ”Programmed Play”
can be repeated too: When you press Repeat
!

6 once after a program is created (the

PROGRAM

indicator must be lit, otherwise press

Program) and the program step indication 
P - 01

is not lit (otherwise press Stop once),

the REPEAT 1 indicator will light and the track
currently selected or playing will be repeated
continuously. If Repeat is pressed twice REPEAT
ALL

will be displayed, all programmed tracks will

be played subsequently and the sequence will be
repeated continuously until Stop is pressed.