HD 740 (serv.man4) - Harman Kardon Audio User Guide / Operation Manual. Page 10

Remote Control Functions

8

a

Press this button to

put the unit in the Standby mode.

b

Press this button to

turn on the HD740. Note that in
order for the Power On button to
operate, the front panel 

1 must be pressed, and the

2 should

glow amber. (See page 11 for more
information.)

c

Press these

buttons to select a specific track on a
disc. The unit will immediately search
for the track and begin to play it. For
tracks 1 through 9 on a disc, you
need only press the desired number.
For tracks 10 and above, the second
digit of the number must be entered
within two seconds of the first digit.
(See page 10 for more information.)
These buttons are also used to enter
track numbers into the memory for
pre-programmed play lists. (See 
page 13 for complete information on
programming the HD740.)

d

Press this

button to begin the process of
programming the HD740 to play the
tracks on a disc in a specific order.
Once the button is pressed, enter
each of the desired track numbers in
quick succession using the 

c. When you have

entered the tracks to be played,
press the 

button 

j to begin

the programmed sequence. (See
page 13 for complete information 
on programming the HD740.)

e

Press this button

to remove tracks from a programmed
sequence. Each press of the button
will remove one track, starting with
the last track programmed to play.
(See page 13 for complete
information on programming the
HD740.)

f

Press this

button once so that the 

REPEAT

and

ALL

indicators are illuminated to

repeat all tracks on the disc. Press
the button a second time to repeat
only the track that is currently being
played, and note that the 

REPEAT

and 

ONE

indicators will light in the

. (See page 14

for more information on Repeat Play.)

g

Press this

button to repeat a segment of the
disc. Press the button once to mark
the start of the portion to be repeated.
Press it again at the end of the desired
sequence. The marked passage will
play continuously until the 

button

k is pressed. (See page 14 for more
information on Repeat Play.)

h

Press one of

these buttons to move to the next
track 

·, or to move back to the

previous track 

‡.

i

Press one of

these buttons to search forward
— or backwards ‚ through a
disc to locate a particular portion of
the selection being played.

j

Press this button to

start the playback of a CD. If the CD
drawer is open, pressing this button
will automatically close the drawer.

k

Press this button to stop the

disc currently being played.

l

Press this button

once to momentarily stop a disc.
When the button is pressed again,
the disc will resume play at the point
it was stopped.

m

Press this 

button to put a disc into play, and to
have all of the tracks played in a
random order. (See page 10 for 
more information.)

n

Press this button 

to select the time display. In normal
operation, the display will show the
running time of a track being played.
Press the button once to check the
time remaining for the track in play.
Press the button a second time to
view the total play time remaining
for the disc in play.

o

Press this button

to check the order of tracks
programmed into the HD740’s
memory. (See page 13 for complete
information on programming the
HD740.)

p

Press this button

to put the HD740 in the Intro Scan
mode. When you press the button,
the unit will play the first 15 seconds
of each track on the disc, and then
move to the next track. Press the
button again to defeat the function
and continue full play of the current
track. (See page 12 for more
information.)

q

Use this

button to select the cassette size
when programming the HD740 for
use with a cassette recorder. (See
page 15 for more information.)

r

Press this button to

begin the programming sequence
that matches the length of a CD’s
tracks to the size of an audio-
cassette when recording a CD to
tape. (See page 15 for complete
information on this process.)

s

Press this

button once to dim the front panel
display to half brightness. Press it
again to turn the display lights off
completely. Another press will return
the display to normal brightness.