Read Harman Kardon HD 730 (serv.man3) User Guide / Operation Manual online
ENGLISH
HD730 REMOTE CONTROL
OPERATION
OPERATION
The remote control operates wtihin a 30
°
angle of the remote sensor on the front
panel of the unit. Make sure that the
remote's front projection “lens” as well as
the REMOTE SENSOR area on the front
panel of the unit are kept free from dirt to
ensure proper transmission and reception
of the infrared beam. Also make sure
that no objects (e.g., stereo cabinet
doors, end tables) block the path from the
remote control to the REMOTE SENSOR
area.
panel of the unit. Make sure that the
remote's front projection “lens” as well as
the REMOTE SENSOR area on the front
panel of the unit are kept free from dirt to
ensure proper transmission and reception
of the infrared beam. Also make sure
that no objects (e.g., stereo cabinet
doors, end tables) block the path from the
remote control to the REMOTE SENSOR
area.
Avoid using the remote control near
fluorescent lamps, as they may shorten
its operating range.
fluorescent lamps, as they may shorten
its operating range.
If your remote control will sit unused for a
long period of time, remove the batteries
to prevent damage from corrosion.
long period of time, remove the batteries
to prevent damage from corrosion.
REAR PANEL REMOTE
JACKS
JACKS
The remote control input jack allows
remote control of this unit via a cable.
This cable can be connected to the
remote control output jack of another
Harman Kardon product. Alternatively, it
can be connected to an accessory device
that converts infrared remote control
signals into detected pulses. While all
Harman Kardon products with remote
control jacks are compatible with one
another, not all accessory devices or
other manufacturer’s products are.
However, it is safe to experiment.
remote control of this unit via a cable.
This cable can be connected to the
remote control output jack of another
Harman Kardon product. Alternatively, it
can be connected to an accessory device
that converts infrared remote control
signals into detected pulses. While all
Harman Kardon products with remote
control jacks are compatible with one
another, not all accessory devices or
other manufacturer’s products are.
However, it is safe to experiment.
Remote Control
11
The remote control for the HD730
provides the same functions found on the
front panel of the compact disc player
itself. In addition, the remote control
provides some functions that are not
found on the front panel.
The functions found on the remote
control that are not found on the front
panel are INTRO, INDEX, DISPLAY, and
the 1-10 keys. These four functions are
described below (for other functions, see
the descriptions on page 4.)
provides the same functions found on the
front panel of the compact disc player
itself. In addition, the remote control
provides some functions that are not
found on the front panel.
The functions found on the remote
control that are not found on the front
panel are INTRO, INDEX, DISPLAY, and
the 1-10 keys. These four functions are
described below (for other functions, see
the descriptions on page 4.)
1. INTRO BUTTON
This button puts your compact disc player
in and out of INTRO SCAN mode. When
INTRO SCAN is on and you press PLAY,
the unit plays only the first 15 seconds of
each track before moving on to the next.
Press the button once to turn on INTRO
SCAN mode; press again to turn it off
and stop the scanning. When the unit is
in INTRO SCAN mode, the FUNCTION
indicator (5) will display the word INTRO.
in and out of INTRO SCAN mode. When
INTRO SCAN is on and you press PLAY,
the unit plays only the first 15 seconds of
each track before moving on to the next.
Press the button once to turn on INTRO
SCAN mode; press again to turn it off
and stop the scanning. When the unit is
in INTRO SCAN mode, the FUNCTION
indicator (5) will display the word INTRO.
2. NUMERIC BUTTONS (0 - 9)
If you press the number that corre-
sponds to your desired track with the
NUMERIC buttons, the unit plays that
track immediately without the PLAY
button.
sponds to your desired track with the
NUMERIC buttons, the unit plays that
track immediately without the PLAY
button.
To select two digit track number, the
second digit must be pressed within
about 2 seconds after the first digit
has been pressed.
second digit must be pressed within
about 2 seconds after the first digit
has been pressed.
During programming or deleting, etc.,
if you select the desired or undesired
track with the NUMERIC buttons, that
track is programmed or deleted
without the PROGRAM or DELETE
button.
if you select the desired or undesired
track with the NUMERIC buttons, that
track is programmed or deleted
without the PROGRAM or DELETE
button.
•
•
•
Each time the DISPLAY button is
pressed, the brightness of the display
changes as follows.
pressed, the brightness of the display
changes as follows.
In the display OFF mode, if any button
is pressed, the unit switches to the
display ON mode.
is pressed, the unit switches to the
display ON mode.
3. DISPLAY BUTTON
ON
DIM
OFF
•
•
Display
Time
1/All
A B
Random
Delete
Intro
Prog/Rev
Tape Size
Edit
9
10
5
6
7
8
1
2
3
4
harmon/kardon
Compact Disc Player
Repeat
3
1
2
harman/kardon
HD730 Engelsk
12/01/98, 15:31
14
Click on the first or last page to see other HD 730 (serv.man3) service manuals if exist.