Read Harman Kardon GO PLAY WIRELESS EMC - CB Certificate online
Report No.: EM201200637-1 Application No.:ZJ00022731 Page 8 of 58
4. RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300 328
4.1 MAXIMUM TRANSMIT POWER
4.2.1 LIMITS
Frequency
EN300 328 clause 4.3.1
2400MHz~2483.5 MHz
20 dBm (i.e. 100mW)
4.2.2TEST PROCEDURE
Test requirement:
EN 300 328 clause 4.3.1
Test Method:
EN 300 328 clause 5.7.2.2
EUT Operation:
Fixed Frequency
Status:
Keep EUT on transmitting mode by the software provided by
manufacturer.
Pretest the EUT at different transmission rate and report show the worst
case data.
manufacturer.
Pretest the EUT at different transmission rate and report show the worst
case data.
Test channel:
Lowest channel: (2402MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Test condition:
Normal and extreme test conditions.
Equipment Used:
Refer to section 3.4
Test Procedure:
As annex C1 of standard EN 300328
Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record GFSK
and 8DPSK test data.
Pre-test the two kinds of power supply mode ,found the AC/DC adapter worse
case, so only record AC/DC adapter test data.
and 8DPSK test data.
Pre-test the two kinds of power supply mode ,found the AC/DC adapter worse
case, so only record AC/DC adapter test data.
4.1.3 TEST SETUP
Antenna
EUT
Receiver
Click on the first or last page to see other GO PLAY WIRELESS service manuals if exist.