GO PLAY WIRELESS (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 11

Read Harman Kardon GO PLAY WIRELESS (serv.man2) EMC - CB Certificate online

Report No.:  EM201200637-3                Application No.:  ZJ00022731                        Page 11 of 81 
 
emission level in the preliminary test. The Analyzer / Receiver scanned from 30MHz to 
300MHz. Emissions were scanned and measured rotating the EUT to 360 degrees, varying 
cable placement and positioning the antenna 1 to 4 meters above the ground plane, in both the 
vertical and the horizontal polarization, to maximize the emission reading level. Record at 
least six highest emissions. Emission frequency, amplitude, antenna position, polarization 
and turntable position were recorded into a computer in which correction factors were used to 
calculate the emission level and compare reading to the applicable limit and only QP reading 
is presented. The test data of the worst-case condition(s) was recorded. 
4.1.3 TEST SETUP 
 
Figure 1. 30MHz to 1GHz radiated emissions test configuration
 
 
 
Figure 2. Above 1GHz radiated emissions test configuration 
Page of 81
Display

Click on the first or last page to see other GO PLAY WIRELESS (serv.man2) service manuals if exist.