GO PLAY MICRO (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 23

Read Harman Kardon GO PLAY MICRO (serv.man2) EMC - CB Certificate online

 
Page 22 of 58 
Report No. 15039146 001 
 
 
 
IEC 60950-1 
Clause 
Requirement + Test 
Result - Remark 
Verdict 
 
 
TRF No. IEC60950_1B 
 
 
 
Method 1, selection and application of components 
wiring and materials 
(see appended table 4.7) 
 
Method 2, application of all of simulated fault 
condition tests 
(see appended table 5.3) 
4.7.2 
Conditions for a fire enclosure 
See below.  
4.7.2.1 
Parts requiring a fire enclosure 
See below.  
N/A 
4.7.2.2 
Parts not requiring a fire enclosure 
Following parts do not require 
a fire enclosure: 
 
Connectors in secondary 
circuits supplied by limited 
power source. 
 
Other components in 
secondary circuits supplied 
by limited power source 
and mounted on V-1 
material. 
4.7.3 
Materials 
 
4.7.3.1 
General 
Those components are 
mounted on V-1 material and 
separated from material of a 
class lower than V-1 by at 
least 13 mm of air. 
4.7.3.2 
Materials for fire enclosures 
 
N/A 
4.7.3.3 
Materials for components and other parts outside 
fire enclosures 
 
N/A 
4.7.3.4 
Materials for components and other parts inside fire 
enclosures 
 
N/A 
4.7.3.5 
Materials for air filter assemblies 
 
N/A 
4.7.3.6 
Materials used in high-voltage components 
 
N/A 
 
 
 
 
ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS 
5.1 
Touch current and protective conductor current 
Class III equipment.  
N/A 
5.1.1 
General 
 
N/A 
5.1.2 
Configuration of equipment under test (EUT) 
 
N/A 
5.1.2.1 
Single connection to an a.c. mains supply 
 
N/A 
5.1.2.2 
Redundant multiple connections to an a.c. mains 
supply 
 
N/A 
5.1.2.3 
Simultaneous multiple connections to an a.c. mains 
supply 
 
N/A 
5.1.3 
Test circuit 
 
N/A 
5.1.4 
Application of measuring instrument 
 
N/A 
Page of 70
Display

Click on the first or last page to see other GO PLAY MICRO (serv.man2) service manuals if exist.