FL 8380 (serv.man10) - Harman Kardon Audio Service Manual (repair manual). Page 6

FL8380

b

c

a

d

e

f

g

h

i

j

k

l

m

n

n

n

n

n

n

n

o

n

n

n

n

n

n

p

0 Disc-Select: Press one of these buttons to
select the disc in a specific position in the CD
drawer.

1 Numeric Buttons: Press these buttons to
select a specific track on a disc. The FL 8380 will
immediately go to the track and begin to play it.
These buttons are also used to enter track num-
bers into the memory for preprogrammed-play
lists. (See page 13 for complete information on
programming the FL 8380.)

2 Clear: Press this button to remove tracks
from a programmed sequence. Each press of the
button will remove one track, starting with the
last track programmed to play. (See page 13 for
complete information on programming the 
FL 8380.)

3 Search: Press these buttons to search for-
ward — or backwards ‚ through a disc to
locate a particular portion of the selection being
played.

4 Skip: Press one of these buttons to move to
the next track fl· or to move back to the previ-
ous track ‡fi on the disc being played.

5 Stop: Press this button to stop the disc cur-
rently being played.

6 Play: Press this button to start the play-
back of a CD. If the CD drawer is open, pressing
this button will automatically close the drawer.

7 Random: Press this button to play all
tracks on one or more CD’s in random order.
(See page 11 for more information.)

8 Pause: Press this button once to momen-
tarily pause a disc. When the button is pressed
again, the disc will resume play from the point
at which it was paused.

9 Program: This button is used to program
the playback of discs and tracks in a particular
order. (See page 13 for complete instructions on
programming the FL 8380.)

A Time: In normal operation, the display will
show the running time of the track being played.
Press the button once to check the time remain-
ing for the track in play. Press the button again
to view the total play time remaining for the disc
in play.

B Intro: Press this button to put the FL 8380
into the Intro Scan mode. When you press this
button, the unit will play the first 10 seconds of
each track on the disc, and then move to the
next track. Press the button again to defeat the
function and continue full play of the current
track. (See page 12 for more information.)

C Repeat: Press this button once to continu-
ously repeat the track currently being played.
Press it a second time to repeat the entire disc
and a third time to repeat all discs. (See page 13
for more information).

D Disc-Skip: Press these buttons to change
to the next or former disc. If a disc position is
empty, the FL 8380 will automatically search for
the next position that contains a disc unless the
disc drawer is open.

E Power On Button: When the FL 8380 is
plugged into an active AC outlet, press this button
to turn the unit on. The Status Mode Indicator
1 will turn green. If the unit is plugged into a
switched outlet, power must be applied to the
switched outlet in order for the Power On button
E to be effective.
F Power Off Button: Press this button to
turn the unit off; the Status Mode Indicator

1

will turn amber, indicating that the unit is in a
Standby mode.

6