DVD 5 (serv.man5) - Harman Kardon Audio User Guide / Operation Manual. Page 7

6 FRONT PANEL CONTROLS

1. Master Power Switch: Press this switch to
apply power to the DVD 5. When the unit is first
turned on, the Status Indicator (3) will turn
orange. Once the unit has been turned on with
this switch, it may be operated from either the
front panel or remote control. Press the switch
again to turn the unit completely off.

2. Standby Switch: Press the button once to
turn the DVD 5 on, press it again to put the unit
in the Standby mode. Note that in order for 
this switch to operate, the Master Power
Switch (1) must be pressed in so that it is in
the ON position.

3. Status Indicator: When the DVD 5 is in the
On mode, this indicator will glow green. When
the unit has been placed in the Standby mode
by pressing the Power-Off button on the
remote, the indicator will glow amber, indicating
that the unit is still connected to the AC main
supply and is ready to be turned on from the
remote control.

4. Headphone Jack: Connect standard head-
phones to this jack for private listening.

5. Headphone Level Control: Turn this 
control to adjust the volume level to the head-
phones. Note that the use of this control will not
change the analog output levels at the rear
panel audio outputs.

6. Disc Tray: This tray holds as many as five
DVD or CD discs that can be played one at a
time in the DVD 5.

7. Disc Skip: Press this button to change the
disc being played. Each press of the button will
move the tray forward to the next occupied posi-
tion in the tray. Note that the unit will skip over
the empty disc positions.

8. Search Forward/Reverse: Press this button
to move forward or backward through a CD or
DVD at one of four speeds. Each press and
release will increase the search speed, as indi-
cated in the on-screen display. Once you have
selected the desired speed, release the button
and the disc will continue to search at fast
speed. To resume normal playback speed, press
the play button.

9. Open/Close Button: Press this button to
open or close the Disc Tray (6).

10. Skip Forward/Reverse: Press this button
to move forward or backward through the music
tracks on a CD disc or the chapters on a DVD
disc.

11. Stop: Press this button once to place the
disc in the Resume mode, which means that
playback will stop, but as long as the tray is not
opened or the disc changed, DVD playback will
continue from the same point on the disc when
the Play Button is pressed again. Resume will
also work if the unit was turned off. To stop a
disc and have play start from the beginning,
press the button twice.

12. Play/Pause: Press this button to momen-
tarily pause playback. To resume playback, press
the button again. If a DVD is playing, action will
freeze and a still picture will be 
displayed when the button is pressed.

13. Direct Access Buttons: Press one of these
buttons to play any of up to five discs loaded in
the Disc Tray.

14. Information Display: This display contains
a variety of indicators that provide information
about the status of the DVD 5 and the disc cur-
rently playing.

15. Display Dim: Press this button to adjust
the brightness of the Information Display by
50% or to turn the display off completely in the
following order: FULL BRIGHTNESS 

➔ HALF

BRIGHTNESS 

➔ OFF ➔ FULL BRIGHTNESS.

16. Remote Sensor: The sensor that receives
the infrared commands from the remote control
is behind this area. Do not cover or obscure this
part of the front panel in order to avoid a mal-
function with the remote.

1. Master Power Switch
2. Standby Switch
3. Status Indicator
4. Headphone Jack

5. Headphone Level Control
6. Disc Tray
7. Disc Skip
8. Search Forward/Reverse

9. Open/Close Button

10. Skip Forward/Reverse
11. Stop
12. Play/Pause

13. Direct Access Buttons
14. Information Display
15. Display Dim
16. Remote Sensor