DVD 5 (serv.man5) - Harman Kardon Audio User Guide / Operation Manual. Page 31

30 CD PLAYBACK

1. During disc playback, enter the track number

directly with the NUMBER (0~9) buttons on
the remote or press STATUS on the Remote to
see Banner Display on the screen if it’s not on
already (as normally in play mode).

2. Press ARROW (RIGHT or LEFT) on the remote

to highlight the Track No icon if not already
highlighted (in play mode this icon is high-
lighted automatically). Enter the Track NUM-
BER (0~9) on the Remote to select Track No.

■ In Pause or Play mode any track can be

selected directly by entering its number with
the NUMBER (0~9) buttons on the remote,
no matter if the Banner Display is on or not.
To select tracks from Stop mode, press Play
and enter the track number directly.

■ You can skip through tracks forward or back-

ward by pressing the NEXT/PREV. buttons
(track skip X / W ) on the remote or SKIP (for-
ward/reverse) on the front panel. When you
hold these buttons pressed, track numbers
will be skipped, the formerly played track will
continue until buttons are released, then the
selected track will be played.

■ To view the number of tracks recorded on the

CD selected (in parenthesis below the ”Track”
icon) press PROG. after the disc was read and
the player is in Stop mode. To return to the
normal display press RETURN.

IntroScan plays the first ten seconds of each
track on the CD similar to the scan feature on
many car radios. To use IntroScan:

1. Press STATUS on the remote if the banner

Display is not on already.

2. Press the ARROW (RIGHT or LEFT) on the

remote to highlight the IntroScan icon. Press
ENTER, the INTRO indicator will appear in the
front panel display and the first 10 seconds of
each track will be played.

3. After IntroScan has gone through all of the

tracks, it stops.

4. If you want to stop IntroScan while it’s in

progress, just press PLAY on the remote, the
INTRO indicator is deleted and the current
track is played normally.

■ IntroScan cannot be used with Program play

(see page 31). If intro is selected while a pro-
gram is played, all tracks on disc will be
played with intro.

Bookmarks are a feature of the DVD5 that
allows you to mark up to nine different points
on a disc and to quickly return to those points
later. The Bookmarks feature works on both DVD
and CD discs.

To Enter a Bookmark, Follow These Steps:
1. While a disc is playing, press STATUS on the

remote to see the Banner Display (if not
already on).

2. Use the ARROW (RIGHT or LEFT) until the

Bookmark icon is highlighted and press
ENTER, the Bookmark menu appears.

3. When you reach the place on disc you want to

mark, press ENTER.

4. To add marks, move the cursor (yellow frame)

with the ARROW (DOWN) to the ”Mark” line
(if not already there), then move the cursor to
any free frame with the ARROW (RIGHT).
Select the track you wish to mark and press
ENTER when the next place on disc you want
to mark is reached.

5. Press CLEAR on the remote to make the

Banner Display disappear.

Recalling a Bookmarked Track
1. While you’re playing a disc, press STATUS on

the remote to see the Banner Display (if not
already on).

2. Press the ARROW (RIGHT or LEFT) on the

remote until the Bookmark icon is high-
lighted.

3. Press ENTER.

4. Press the ARROW (UP) to move to the ”Go

To” parts of the Bookmark menu.

5. Use the ARROW (RIGHT or LEFT) arrow to

select the Bookmarked Track you want to acti-
vate.

6. Press ENTER to go to the bookmark.

7. To make the Banner Display disappear from

the screen, press CLEAR in the remote.

Clearing a Bookmark
The bookmarks are cleared each time a disc is
removed from the player or when the power is
turned off completely (not to Standby only).

If all 9 bookmarks are in use, you can still mark
new scenes, but the previous bookmarks will be
erased.

The time display in the front panel display or at
the right of the Banner Display can be selected
too:

1. If Banner Display is on, press  ARROW (right)

on the remote to highlight the Time icon

2. In normal operation the running time of the

track being played is displayed, the Banner
Display reads the Track Elapsed Time.

3. Press the ENTER button once to display the

Track Remain Time, press again to display the
elapsed time of all tracks played (Disc Elapsed
Time). If you press ENTER a third time the Disc
Remain Time will be displayed.

■ All time indications are available also with

Program play (see page 31).