DVD 29 - Harman Kardon Audio Service Manual (repair manual). Page 41

Read Harman Kardon DVD 29 Service Manual online

ESMT 
 
 
M12L64164A
 
Elite Semiconductor Memory Technology Inc.
 
 
Publication DateMar. 2003 
                                                                                                                              Revision: 1.7 
    2/44
 
 
FUNCTIONAL BLOCK DIAGRAM 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PIN FUNCTION DESCRIPTION 
PIN NAME 
INPUT 
FUNCTION 
 CLK 
 System Clock 
 Active on the positive going edge to sample all inputs 
  CS  
 Chip Select 
  Disables or enables device operation by masking or enabling all 
  inputs except CLK , CKE and L(U)DQM 
 CKE 
 Clock Enable 
  Masks system clock to freeze operation from the next clock cycle. 
  CKE should be enabled at least one cycle prior new command. 
  Disable input buffers for power down in standby. 
 A0 ~ A11 
 Address 
  Row / column address are multiplexed on the same pins. 
  Row address : RA0~RA11, column address : CA0~CA7 
  A12 , A13 
  Bank Select Address 
  Selects bank to be activated during row address latch time. 
  Selects bank for read / write during column address latch time. 
  RAS  
 Row Address Strobe 
  Latches row addresses on the positive going edge of the CLK with 
  RAS  low. 
  Enables row access & precharge. 
  CAS  
 Column Address Strobe 
  Latches column address on the positive going edge of the CLK with
  CAS  low. 
  Enables column access. 
  WE  
 Write Enable 
  Enables write operation and row precharge. 
  Latches data in starting from  CAS ,  WE  active. 
  L(U)DQM 
  Data Input / Output Mask 
  Makes data output Hi-Z, t
SHZ
 after the clock and masks the output. 
  Blocks data input when L(U)DQM active. 
  DQ0 ~ DQ15 
  Data Input / Output 
  Data inputs / outputs are multiplexed on the same pins. 
  VDD / VSS 
  Power Supply / Ground 
  Power and ground for the input buffers and the core logic. 
  VDDQ / VSSQ    Data Output Power / Ground 
  Isolated power supply and ground for the output buffers to provide 
  improved noise immunity.   
  NC 
  No Connection 
  This pin is recommended to be left No Connection on the device. 
 
L(U)DQM
DQ
 Mode 
 Register
 
Control Logic 
 Column
 Address
 Buffer
      & 
 Refresh
 Counter
Row 
Address
Buffer 
    & 
Refresh
Counter
Bank D
Row Decode
r
 
Bank A
Bank B
Bank C
Sense Amplifier
Column Decoder 
Data Control Circuit
Latch Circuit
 
Input & Out
put 
Buf
fer 
Address 
 Clock 
 Generator
 
CLK 
CKE 
Command Deco
der
 
CS 
RAS 
CAS 
WE 
harman/kardon
DVD 29/230 Service Manual
Page 41 of 55
Page of 55
Display

Click on the first or last page to see other DVD 29 service manuals if exist.