Read Harman Kardon DVD 29 Service Manual online
Front Panel Controls
Main Information Display: This display
delivers messages and status indications to help
you operate the DVD player.
delivers messages and status indications to help
you operate the DVD player.
1 Power On/Off (Standby): Press the button
once to turn the DVD player on, press it again to
put the unit in the Standby mode.
once to turn the DVD player on, press it again to
put the unit in the Standby mode.
2 Open/Close: Press this button to open or
close the Disc Tray.
close the Disc Tray.
3 Play/Pause: Press to initiate playback or to
resume playback after Pause has been pressed.
Press this button to momentarily pause play-
back. To resume playback, press the button
again. If a DVD is playing, action will freeze and
a still picture will be displayed when the button
is pressed.
resume playback after Pause has been pressed.
Press this button to momentarily pause play-
back. To resume playback, press the button
again. If a DVD is playing, action will freeze and
a still picture will be displayed when the button
is pressed.
4 SETUP: Press this button to use the
DVD 29’s on-screen menu system to adjust the
player’s configuration settings. Note that the
Info Button
DVD 29’s on-screen menu system to adjust the
player’s configuration settings. Note that the
Info Button
A must be pressed to access the
DVD 29’s Player Information menu to obtain
detailed disc information, and to configure the
playback mode of the disc.
detailed disc information, and to configure the
playback mode of the disc.
5 Stop: Press this button once to place the
disc in the Resume mode, which means that
playback will stop, but as long as the tray is not
opened or the disc changed, DVD playback will
continue from the same point on the disc when
the Play Button is pressed again. Resume will
also work if the unit was turned off. To stop a
disc and have play start from the beginning,
press the button twice.
disc in the Resume mode, which means that
playback will stop, but as long as the tray is not
opened or the disc changed, DVD playback will
continue from the same point on the disc when
the Play Button is pressed again. Resume will
also work if the unit was turned off. To stop a
disc and have play start from the beginning,
press the button twice.
6 Skip/Search (Previous): Press this button
to move backward through the music tracks on
a CD disc or the chapters on a DVD disc. Keep
the button pressed to search backwards at one
of the available speeds.
to move backward through the music tracks on
a CD disc or the chapters on a DVD disc. Keep
the button pressed to search backwards at one
of the available speeds.
7 Skip/Search (Next): Press to move forward
through the music tracks on a CD or the
chapters on a DVD disc. Keep the button pressed
to search forwards at one of the available
speeds.
through the music tracks on a CD or the
chapters on a DVD disc. Keep the button pressed
to search forwards at one of the available
speeds.
8 Dimmer: Press this button to reduce the
brightness of the Information Display by 50% or
to turn the display off completely in the
following order: FULL BRIGHTNESS
brightness of the Information Display by 50% or
to turn the display off completely in the
following order: FULL BRIGHTNESS
➔ HALF
BRIGHTNESS
➔ OFF ➔ FULL BRIGHTNESS.
9 ARROW buttons (
M
/
N
): Use to move the
cursor in the OSD.
A ENTER: Press this button to activate a
setting or option.
setting or option.
B ARROW buttons (
K
/
L
): Use to move
the cursor in the OSD.
Main Information Display
1 Power On/Off (Standby)
2 Open/Close
3 Play/Pause
1 Power On/Off (Standby)
2 Open/Close
3 Play/Pause
4 Setup
5 Stop
6 Skip/Search (Previous)
7 Skip/Search (Next)
5 Stop
6 Skip/Search (Previous)
7 Skip/Search (Next)
8 Dimmer
9 Arrows left and right
A Enter
B Arrows up and down
9 Arrows left and right
A Enter
B Arrows up and down
1
3
9
A
B
4
5
6
7
8
2
33908_DVD29_ENG 18/07/07 16:43 Side 6
harman/kardon
DVD 29/230 Service Manual
Page 4 of 55
Click on the first or last page to see other DVD 29 service manuals if exist.