DVD 22 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 6

 

 

Test report no. JSH0311046-001 

                                          

                Page 5 of 19 

 
3.TEST SPECIFICATIONS 
 
3.1 Standards 
 
EN55013:2001: Limits and methods of measurement of radio disturbance characteristics of broadcast 
receivers and associated equipment. 
 
EN 61000-3-2 (2000): Limits for harmonic current emissions (equipment input current up to and 
including 16A per phase.) 
  
EN 61000-3-3 (1995)+A1: 2001: limitation of voltage fluctuation and flicker in low voltage supply 
systems for equipment with rated current up to and including 16A  
 
3.2 Additions, deviations and exclusions from standards  
 
No additions, deviations or exclusions have been made from standard. 
 
3.3 Purpose of the test 
 
Purpose of test: To determine whether the equipment under test fulfils the EMC-emission requirement 
of the standards stated section 3.1 
 
3.4 Mode of operation during the test 
 
The EUT was set to achieve maximum emission. 
 
4.TEST SUMMARY 
 
The results in this report apply only to sample tested: 
 
                 TEST ITEM 

PASSED THE TEST 

NOTE 

Mains terminal continuous disturbance voltage  

Pass 

 

Continuous disturbance power 

Pass 

 

Antenna Terminal disturbance voltage 

NA 

 

Radiated emission test 

NA 

 

Harmonics Pass 

 

Voltage fluctuation-Flicker 

Pass 

 

  
Notes: 1: NA =Not Applicable 
            2: Margin to the limit is within the uncertainty interval of the measured value. 
            3: Limit is exceeded with a margin less than the uncertainty interval of the measured value.