DVD 10 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 8

8

1

2

3

4

6

7

8

9

9

5

1. OPTICAL OUT: Use optical cable (not provided) to connect your DVD

Player to a compatible Dolby Digital or DTS receiver or decoder. Dolby
Digital and DTS offer theater-quality sound (5.1-Channels).

2. COAXIAL OUT: Use coaxial cable (not provided) to connect your DVD

Player to a compatible Dolby Digital or DTS receiver or decoder. Dolby
Digital and DTS offer theater-quality sound (5.1-Channels).

3. AUDIO OUT: Insert audio cables (left and right) to these jacks on

your DVD Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.

4. S-VIDEO OUT: If your TV has an S-Video jack, you can connect an 

S-Video cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal; remember to
connect the left and right audio cables.

5. VIDEO OUT: Connect a video cable to this jack and to the Video

Input jack on your TV. The video cable only carries the video signal;
remember to connect the left and right audio cables.

6. SCART OUT (AUX): If an external playback unit has a SCART socket,

you can connect a SCART cable to it and to your DVD Player. The
SCART cable carries both audio and video signals of the external unit.
These signals will be routed through the SCART connector of the DVD
to the TV when the DVD player is turned on.

7. SCART OUT (TV): If your TV has a SCART socket, you can connect a

SCART cable to your TV and to your DVD Player for improved video
quality. The SCART cable carries both audio and video signal.
Your DVD10 is equipped with two SCART connectors, one for direct
connection to the TV, the second for throughput of VCR (playback
only) or any other playback video source to a TV with only one SCART
input.

8. Remote IR Input: Connect the output of a remote infrared sensor or

the remote control output of another compatible Harman Kardon
product to this jack. This will enable the remote control to operate
even when the front-panel Remote Sensor on the DVD10 is blocked.
This jack may also be used with compatible IR remote control based
automation systems. Remote IR Output: Connect this jack to the IR
input jack of another compatible Harman Kardon remote controlled
product to have the built-in Remote Sensor on the DVD10 provide IR
signals to other compatible products.

9. AC CORD (230V / 50Hz): Plug AC Cord to an unswitched 220-

240Volt AC outlet.

Note: you’ll find more details about all Audio/Video connections under
Setup and Connections on the following pages.