Read Harman Kardon DVD 10 (serv.man2) User Guide / Operation Manual online
27
Playing DVD Discs
Digital Audio Out
This setting determines the digital signal format to be output from the
optical/coaxial digital audio output of the DVD10. The optimal setting
will depend on the digital decoder connected to that output.
optical/coaxial digital audio output of the DVD10. The optimal setting
will depend on the digital decoder connected to that output.
• PCM: Choose this setting if the decoder connected to the digital output
is able to decode only normal PCM data rather than Dolby Digital or
DTS. PCM and Dolby Digital tracks will be output as PCM datastream
only, DTS tracks will output no signal (see also comment in ”Dolby
Digital”below).
DTS. PCM and Dolby Digital tracks will be output as PCM datastream
only, DTS tracks will output no signal (see also comment in ”Dolby
Digital”below).
• Dolby Digital: Choose this setting if you connected a Dolby Digital
receiver or decoder to your DVD player, but without DTS decoder. PCM
and Dolby Digital tracks will be output, DTS tracks will output no signal
(see also information note below). But with virtually all DTS discs a 2-
channel digital audio track can be selected as other Audio Track (by
pressing the Audio button on remote, see page 16), that will deliver
PCM signal to the digital output.
and Dolby Digital tracks will be output, DTS tracks will output no signal
(see also information note below). But with virtually all DTS discs a 2-
channel digital audio track can be selected as other Audio Track (by
pressing the Audio button on remote, see page 16), that will deliver
PCM signal to the digital output.
• DTS: Choose this setting if you connected a receiver or decoder to your
DVD player with Dolby Digital and DTS decoding. Then all recordings
will be output and played, whether PCM, Dolby Digital or DTS format.
will be output and played, whether PCM, Dolby Digital or DTS format.
To select Digital Audio Output format follow these steps:
1. Press ARROW (UP or DOWN) on the remote to select Digital Audio Out
on the SET UP MENU DISPLAY.
2. Press ENTER or ARROW (right), Digital Audio Out Display appears.
3. Press ARROW (UP or DOWN) on the remote to select specific Digital
Audio Out Menu.
4. Press ENTER.
5. Press PLAY to resume normal playback or RETURN to delete Set Up
Display from screen.
Important : DTS information
If you set the Digital Audio Out Menu to DTS, to listen to DTS you must
have your DVD player connected to a receiver or DTS decoder with DTS
decoding and the disc you play must contain DTS audio. If you choose
DTS and you play a DTS disc, but your receiver or decoder doesn’t
support DTS, you won’t hear any audio when you play the disc.
If you set the Digital Audio Out Menu to DTS, to listen to DTS you must
have your DVD player connected to a receiver or DTS decoder with DTS
decoding and the disc you play must contain DTS audio. If you choose
DTS and you play a DTS disc, but your receiver or decoder doesn’t
support DTS, you won’t hear any audio when you play the disc.
Click on the first or last page to see other DVD 10 (serv.man2) service manuals if exist.