Read Harman Kardon DVD 1 (serv.man24) User Guide / Operation Manual online
11
Connecting to a TV set or monitor with SCART con-
nectors
nectors
Important Notes on SCART and RGB format:
• Your DVD1 is equipped with two SCART connectors, one for direct con-
nection to the TV, the second (AUX) for throughput of VCR or any other
video source to a TV with only one SCART input. The signal from this
video source will be routed through the SCART connector of the DVD
to the TV automatically when the unit plays (composite video only).
video source to a TV with only one SCART input. The signal from this
video source will be routed through the SCART connector of the DVD
to the TV automatically when the unit plays (composite video only).
• Both SCART connectors provide the video signal as well as audio
(stereo L/R) signals.
• The SCART connector for the TV provides the composite video signal as
well as the direct RGB signal, delivering the best video performance
possible. To view RGB video on your TV, the RGB compatible SCART
connector must be used. Configure this connector to RGB (e.g. in the
TV’s menu), if necessary. Note that with RGB video the colour intensity
cannot be adjusted.
possible. To view RGB video on your TV, the RGB compatible SCART
connector must be used. Configure this connector to RGB (e.g. in the
TV’s menu), if necessary. Note that with RGB video the colour intensity
cannot be adjusted.
• When the RGB video signal is used, DVD´s recorded with the NTSC for-
mat (with regional code ”Zero” ) or 2 can be viewed on Non-NTSC
compatible TVs.
compatible TVs.
Setup and Connections
TV or Monitor
To SCART connector.
To SCART connector of any
video source.
To optical or coaxial input of
Dolby Digital/DTS
Decoder/Amplifier/Receiver.
To analog input of
stereo or Pro Logic
Amplifier/Receiver.
Click on the first or last page to see other DVD 1 (serv.man24) service manuals if exist.