Read Harman Kardon DVD 1 (serv.man17) User Guide / Operation Manual online
9
Setup and Connections
• Ensure that the power switch of this unit and other equipment to be
connected is set to off before commencing connection.
• Do not block ventilation holes of any of the equipment and arrange
them so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and
video cables.
• Select the appropriate screen shape at the initial setting “TV Aspect ”
according to your TV set (4:3 or 16:9), see page 26.
TV
To S-Video input
To audio input (red/white)
To power outlet (AC 230V/50 Hz)
To video input
(yellow)
(yellow)
Note:
•
If the DVD/CD player is connected to the TV through a video cassette
recorder, the picture may not be played back normally with some
DVDs. If this is the case, do not connect the player via the VCR.
recorder, the picture may not be played back normally with some
DVDs. If this is the case, do not connect the player via the VCR.
•
The S (separate) video output connector separates the color (C) and
luminance (Y) signals before transmitting them to the TV set in order
to achieve a sharper picture. Use the S-video cable (optional) when
connecting the player to a TV set equipped with an S-video input for
improved picture clarity.
luminance (Y) signals before transmitting them to the TV set in order
to achieve a sharper picture. Use the S-video cable (optional) when
connecting the player to a TV set equipped with an S-video input for
improved picture clarity.
• Most European TV´s are equipped with SCART connectors rather than
with a normal video input (yellow cinch). In that case the SCART con-
nection should be used, providing the audio signal too, (see page 8).
Provide´separate the audio connection to TV only if your TV is connect-
ed to the video or S-video output.
nection should be used, providing the audio signal too, (see page 8).
Provide´separate the audio connection to TV only if your TV is connect-
ed to the video or S-video output.
• When the audio signal is fed to stereo or Pro Logic amplifiers/decoders
or receivers rather than to the TV, connect the Audio Out jacks to any
normal audio input on your amplifier/
decoder/receiver. The DVD1 will ”downmix” Dolby Digital recordings to
Pro Logic, available on these connectors, all analog surround or stereo
signals will be fed to them directly.
normal audio input on your amplifier/
decoder/receiver. The DVD1 will ”downmix” Dolby Digital recordings to
Pro Logic, available on these connectors, all analog surround or stereo
signals will be fed to them directly.
Connecting to a stereo TV set and stereo or Pro Logic Amplifier/Receiver
Click on the first or last page to see other DVD 1 (serv.man17) service manuals if exist.