DIGITAL LOUNGE (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 4

4 INTRODUCTION

■ Simultaneous Playback of MP3 and

■ Side- and rear-panel USB On-The-Go

■ Extensive Programming Capability for

■ Parental Lock Controls Prevent

■ Playback of DivX compressed video files
■ Multiple Options for Language,

■ Multiple-Angle Capabilities With

■ Ergonomically Designed Remote

■ Multiple digital inputs and outputs
■ Multiple Analog Inputs and Outputs
■ High Definition On-screen menu and

■ Subwoofer Trigger to Control

IMPORTANT NOTES:
This manual describes the working of your
complete Harman Kardon Digital Lounge system,
and replaces the individual manuals found in
some of the components of your system.

Only use the Digital Lounge system controller
with the loudspeaker system supplied. Failure to
do so may cause damage to either the controller
or the loudspeakers and will invalidate any
warranty.

All of the optional system settings have been
preset at our factory for correct operation of the
system. All you have to do is insert a disc, sit
back, and enjoy a great home theater
experience.

You may want to change some of the optional
settings. A description of all the optional settings
and instructions for changing them are found in
the second half of the manual.

This system was designed to provide you with
many years of reliable operation with a minimum
of care and maintenance. Every component in
your system was in perfect working condition
when it left our factory. If you experience any
problems with the set-up or operation of this
system, please review the Troubleshooting Guide
at the end of this manual before you contact
your authorized Harman Kardon dealer.

Verify Line Voltage Before Use
Your Digital Lounge system has been designed
for use with 220-240-Volt AC current.
Connection to a line voltage other than that for
which it is intended can create a safety and fire
hazard and may damage the system.

If you have any questions about the voltage
requirements for your specific model, or about
the line voltage in your area, contact your dealer
before plugging the unit into a wall outlet.

Do Not Use Extension Cords
To avoid safety hazards, use only the power
cords attached to your system components. We
do not recommend that extension cords be used
with this product. As with all electrical devices,
do not run power cords under rugs or carpets or
place heavy objects on them. Damaged power
cords should be replaced immediately by an
authorized service depot with a cord meeting
factory specifications.

Handle the AC Power Cord Gently
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord.
If you do not intend to use the system for any
considerable length of time, disconnect the plug
from the AC outlet.

Do Not Open the Cabinet
There are no user-serviceable components inside
the system components. Opening the cabinets or
rear panels may present a shock hazard, and any
modification to the system components will void
your guarantee. If water or any metal object
such as a paper clip, wire or a staple accidentally
falls inside the system components, disconnect
them from the AC power source immediately,
and consult an authorized service station.