DIGITAL LOUNGE (serv.man14) - Harman Kardon Audio Service Manual (repair manual). Page 12

Digital Louge

 Main Information Display
1 Power On/Off (Standby)
2 Open/Close

3 USB On-The-Go Input
4 Headphone Jack
5 Volume Control

6 Slot Loader

 Main Information Display: This  display
delivers messages and  status indications to help
you  operate the Digital Lounge Controller.

1 Power On/Off (Standby): Press the button
once to turn the Digital Lounge Controller on,
press it again to put the unit in the Standby
mode. 
Note that when the Digital Lounge Controller is
switched on, the Power Indicator around the
button turns blue.

2 Eject: Press this button to release a disc
from the loader.

3 USB On-The-Go Input: This input may be
used to temporarily connect a USB thumb device
or portable hard disk for direct playback of
audio, image of video files or a USB hub. The
USB inputs are designed to power a single USB
device at a time. If additional hard disks are
 connected through a hub it is necessary that
additional external power supplies are used to
power the hub and hard disks.

4 Headphone Jack: This jack may be used to
listen to the system's output through a pair of
headphones. Be certain that the headphones
have a standard 3.5 mm stereo phone plug.
Note that the main room speakers will
 automatically be turned off when the
 headphone jack is in use. 

When configuring your system using EzSet/EQ,
the calibration microphone should be plugged
into this jack 

4.

5 Volume Control: Turn this knob clockwise
to increase the volume, counterclockwise to
decrease the volume. If the system is muted, 
adjusting volume control will automatically
release the unit from the silenced condition.

6 Slot loader: Gently insert a CD or DVD into
this slot, with the printed side of the disc facing
up. Note there is no drawer. Press the Eject
Button

2 to release the disc

harman/kardon

HS 350/650DL Service Manual

Page 12 of 89

DIGITAL LOUNGE 6XX