CDR 25 (serv.man5) - Harman Kardon Audio User Guide / Operation Manual. Page 17

PLAYBACK BASICS  17

Continuous Play
Since the CDR 25 has more than one CD deck,
you may play a disc in either drawer. In normal
operation the selected disc will be played once,
then play will stop automatically.

However, you may also use the Continuous Play
mode to use the CDR 25 for extended play by
playing through all the tracks of the disc in one
tray, automatically switching to the disc in the
second tray, and then continually playing each
disc in sequence until the Stop Button 

N is

pressed.

To initiate continuous play, first press the
Continuous Play Button ı

G and note that

the Information Display Ú will show the cur-
rent state of the mode. If the readout displays
CONTINUE OFF

press the Continuous

Play Button ı

G again so that the message

changes to CONTINUE ON. Next, press the
front panel play button *

  that you wish

to play first, or press the CDP Select 

3 or

CDR Select 

 on the remote and then press

the Play Button 

9.

Continuous playback may be stopped at any
time by pressing a Stop Button &¸

N. To

cancel continuous play after the current disc is
playing, press the Continuous Play Button
ı

G twice so that CONTINUE OFF

appears in the Information Display Ú.

Time Display
The CDR 25’s time display is capable of showing
a wide range of information about the contents
of a CD.

Once the disc’s Table of Contents or TOC data
has been read, the Information Display K
for any deck that has a CD inside will show the
number of tracks on the disc in the two left dig-
its of the display, and the total running time of
the disc. When the disc is playing, the tracks will
count up as each new track is reached, and time
display will show the elapsed time for the track
being played.

To view the time remaining in the track being
played, press the Display button

1 

ÒÙ for the deck in use so that the
REMAINING TIME

Indicators ML

illuminate. The Information Display K will
count down the time remaining in the track, and
at the start of the next track the counter will
start to count down the running time of that
track.

To view the total time remaining on the disc,
press the Display Button

1 ÒÙ for

the deck in use so that the Total Time
Indicators NL illuminate. The Information
Display K will show the total time remaining
for all tracks on the disc and count down until
the disc has finished playing. When the disc has
played all the way through, the total number of
tracks and the total running time of the disc will
be displayed.

Headphone Listening
You may listen to the output of the CDR 25
through headphones at any time by simply plug-
ging the headphones into the Front-Panel Jack
4. The volume of the headphone output may
be adjusted with the Headphones Level
Control 5. Note that changes to the head-
phone level will not alter the output settings to
the analog outputs. Those levels are fixed, and
the volume should be adjusted using your
receiver, preamp or processor.