BDS 580 (serv.man4) - Harman Kardon Audio Service Manual (repair manual). Page 15

BDS 580

Setting up the Receiver

14

1.  When you turn on your BDS system for the first time, the on-

screen menu will show the Initial Setup screens. The first screen 
allows you to select the language you want to use.

2.  Press the OK button, and the Initial Setup TV reso-

lution screen will be displayed.

3.  Highlight your choice and press the OK button. Next, the Initial Setup 

aspect-ratio screen will appear. 16:9 Full is the best choice for most displays.

4.  Highlight your choice and press the OK button. Setup is complete. Press 

OK once more to finish Initial Setup and show the home menu.

 

Connecting to Network through Wi-Fi

You can connect the unit to the internet through Wi-Fi.

 

The following instructions help you to connect your unit to the network.

•  From the home screen, select Settings, then Network. 
•  Make sure Network Connection is set to ‘On.’ 
•  Set ‘Type’ to ‘Wi-Fi.’
•  Select your preferred method of connecting to your wireless network under 

‘Setup Wi-Fi.

 There are four options for setting up wireless networks

•  Choose a wireless network
•  Configure Wi-Fi by iOS
•  WPS PBC (Push Button Control)
•  WPS PIN 

Choosing a Wireless Network
Select ‘Choose a network’ from the ‘Setup Wi-Fi’ list.

•  Follow the instructions on the screen to select your wireless home network 

and enter your security password, if applicable.