Read Harman Kardon BDS 570 Service Manual online
15
Programming Remote Control “Punch-Through” Commands
after programming the remote to control an auxiliary (aux) component, you can also
program it so it will control the aux component’s channel up/down and transport
functions (play, pause, etc.) even when the remote is not in the aux-control mode. for
example, if the remote is programmed to operate your tV in the aux control mode, you
can also have the tV’s channel +/– functions “punch through” and operate even when
the remote is in the Disc, radio or ipod control modes.
1. press and hold the Input button for the main device the remote will be operating. the
button will light up, go dark and then light up again. release the button.
2. Select the type of punch-through programming.
a) for “punch-through” channel control, press the channel up button.
b) for “punch-through” transport control, press the play button.
b) for “punch-through” transport control, press the play button.
3. press the aux button. the original Input button will flash to confirm.
you can repeat Step 1 – Step 3 for any of the remote’s Input buttons (aux, radio, etc.).
note: “punch-through” channel and transport commands will override the existing
commands for those buttons in the source modes you program.
to undo “punch-through” programming, follow the same steps as above, but press the
to undo “punch-through” programming, follow the same steps as above, but press the
same Input button in Step 1 and Step 3.
Using the Remote After it is Programmed
pressing the remote’s aux Input button will put the remote into the auxiliary-control
mode, and it will control the auxiliary component(s) via the codes you have programmed
into it.
to switch the remote back to the BDS receiver-control mode from the auxiliary-control
to switch the remote back to the BDS receiver-control mode from the auxiliary-control
mode, press any of the other Input buttons or the Home button.
Setting Up the Receiver
note: the menu screens shown in this manual are for illustrative purposes and may
differ somewhat from the actual displays.
to set up your BDS receiver, you will use the remote to navigate through all of the on-
to set up your BDS receiver, you will use the remote to navigate through all of the on-
screen menus and to make selections from them.
• use the cursor up/Down buttons to navigate through the menu list. When an item is
highlighted, a white border will appear around it.
• to select a highlighted item, press the ok button. the screen will change depending
on your selection.
• to return to the previous screen, press the exit button.
Setup Wizard
When you turn your BDS receiver on for the first time, the on-screen menu will display
the Setup Wizard.
Setup Wizard
Page: 1/5
Next
Welcome to the Harman Kardon BDS Setup
Wizard.
Some simple information is needed to ensure
you get the best experience from your product.
You can adjust these settings later in addition
top making changes to more advanced settings
by selecting ‘Settings’ from the Home Menu.
OK
Before you can use your BDS receiver, you need to set the language and make a few
basic settings so that its video output will work properly with your tV. press the ok
button and the Wizard’s language screen will appear.
Setup Wizard
Page: 2/5
Next
Please select which language you would like
the BDS menus to appear in.
the BDS menus to appear in.
OK
Previous
English
Español
Français
Deutsch
Italiano
after setting the language you want the on-screen menus to appear in, press the ok
button and the Wizard’s tV-resolution screen will appear.
Setup Wizard
Page: 3/5
Next
Please select the highest resolution that your TV
supports. If you are unsure, select ‘Auto’.
Upon making a selection the screen will be
changed to the chosen resolution. You will be
presented with the option to continue with the new
resolution or ‘Cancel’ to return to the previous
resolution. If the screen remains blank, please wait
15 seconds without pressing anything and the
system will automatically return to the previous
resolution.
supports. If you are unsure, select ‘Auto’.
Upon making a selection the screen will be
changed to the chosen resolution. You will be
presented with the option to continue with the new
resolution or ‘Cancel’ to return to the previous
resolution. If the screen remains blank, please wait
15 seconds without pressing anything and the
system will automatically return to the previous
resolution.
OK
Previous
Auto
480p/576p
720p
1080i
1080p
after selecting your tV’s highest resolution, press the ok button, and the Wizard’s
aspect-ratio screen will appear. note: If you are unsure of your display’s highest
resolution, select “auto” and the BDS receiver will select the optimal resolution for you.
Setup Wizard
Page: 4/5
Next
Please select the best aspect ratio that fits your TV.
Please see the owners manual for additional
explanation.
explanation.
OK
Previous
16:9 Full
16:9 Normal
4:3 Pan & Scan
4:3 Letterbox
after selecting the aspect ratio that best fits your tV, press the ok button to save your
setting, then press it again to exit the Setup Wizard.
Preparing the Remote Control and
Setting Up the Receiver
BDS 270/BDS 570
harman/kardon
BDS 270 + 570 Service Manual
Page 16 of 90
Click on the first or last page to see other BDS 570 service manuals if exist.