Read Harman Kardon BDS 270 Service Manual online
12
Connections
Connecting Your Coaxial Digital Audio Source Device
If one of your non-HDMI source devices has a coaxial digital output, connect it to the
receiver’s coaxial Digital Input connector. note: Make only one type of digital connection
(HDMI, optical or coaxial) from each device.
to coaxial Digital
audio output
coaxial Digital audio
cable (not supplied)
coaxial-equipped
Source Device
Connecting Your Analog Audio Source Devices
use the receiver’s aux In connectors for up to two source devices that don’t have HDMI
or digital audio connectors.
to Stereo analog
audio output
Stereo audio cable
(not supplied)
analog
Source Device
Connecting Your Analog Recorder
connect an analog audio recorder’s inputs to the receiver’s analog audio output
connectors. you can record any analog audio input signal.
to record
Inputs
Stereo audio cable
(not supplied)
analog
recorder
Connect an Optional The Bridge IIIP
connect an optional the Bridge IIIp to the receiver’s the Bridge IIIp connector. Insert the
plug until it snaps into place in the connector.
IMPORTANT: Connect The Bridge IIIP
only with the receiver’s power turned OFF.
the Bridge IIIp
BDS 270/BDS 570
harman/kardon
BDS 270 + 570 Service Manual
Page 13 of 90
Click on the first or last page to see other BDS 270 service manuals if exist.