Read Harman Kardon AVR 85 (serv.man7) Technical Bulletin online
8)
TO TEST:
a)
Plug in the unit; connect speakers to left, right, and center output terminals.
b)
Turn the unit on; switch the unit to “Prologic” mode by use of the mode buttons on the front panel.
c)
Press the button “TEST TONE” on the remote control. The display should read “FRONT L” and
“TEST” should flash.
d)
Adjust the master volume, and verify test noise is heard from front left channel.
e)
Press the button “CH SELECT” on the remote control to change to the right and center speakers,
and verify test noise is heard from each one.
f)
Press the button “TEST TONE” on the remote control again to exit the test.
Model
Serial number
120V
Serial number
230V
Status
Action
AVR85
MJ0011-01001
to
MJ0011-02500
MJ0012-01001
to
MJ0012-01500
Poor connections
in two areas on
main PCB
Clean & re-solder
connections
AVR85
MJ0011-02501
and above
MJ0011-01501
and above
Modified by
factory
NONE REQUIRED
harman/kardon Incorporated 80 Crossways Park West, Woodbury New York 11797 (516) 496-3400
Click on the first or last page to see other AVR 85 (serv.man7) service manuals if exist.