Read Harman Kardon AVR 85 (serv.man4) User Guide / Operation Manual online
AVR85 120 rev (g) 6/14/97
On-Screen Display
AUDIO
or
VIDEO
. When either input
type is highlighted in reverse video use
the
the
‹
or
›
buttons
i
to select the
source you wish to listen to or view.
Remember that the video source should
be selected first when you wish to watch
one source and listen to another.
Remember that the video source should
be selected first when you wish to watch
one source and listen to another.
To select a digital audio input use the
⁄
or
¤
buttons
i
to position the on-
screen cursor
>
next to
DIGITAL
. Press
Select
j
and note that the word
DIGITAL
will be highlighted in reverse
video. Then use the
‹
or
›
buttons
i
to select the desired digital source. Note
that when the digital source is selected,
the audio source will indicate
that when the digital source is selected,
the audio source will indicate
**
.
You may also use this menu to turn the
attenuation, or ATT, function on for this
source only by moving the cursor to the
attenuation, or ATT, function on for this
source only by moving the cursor to the
ATT
line and using the
‹
or
›
buttons
i
to select
ON
or
OFF
. When the ATT
function is enabled the input level is
reduced to prevent overloading the input
circuits.
reduced to prevent overloading the input
circuits.
SURROUND MODE
: At this menu (see
figure #15) you may change the
surround mode by using the
surround mode by using the
⁄
or
¤
buttons
i
to position the on-screen
cursor
>
next to
MODE
and using the
‹
or
›
buttons
i
to select the desired
mode. To change the delay time position
the cursor next to
the cursor next to
SURROUND CH
and
then use the
‹
or
›
buttons
i
to select
desired delay time for the surround
channels. Note that an adjustment for
the delay time of the center channel is
possible only in the Dolby Digital mode.
channels. Note that an adjustment for
the delay time of the center channel is
possible only in the Dolby Digital mode.
TEST TONE
: At this menu you may
adjust the speaker output levels. For
information on this procedure, refer to
the System Configuration section of this
manual.
information on this procedure, refer to
the System Configuration section of this
manual.
MULTI-ROOM SEL
: For information
on configuring and using the multiroom
audio functions of the AVR85, consult the
appropriate section of this manual.
audio functions of the AVR85, consult the
appropriate section of this manual.
SET UP MENU
: For information on
using the Setup menus, refer to the
System Configuration section of this
manual.
System Configuration section of this
manual.
SLEEP TIMER SET
: This enables you
to set the sleep timer, which you will
place the unit in a standby mode after a
set period of time. To reach this menu,
press the
place the unit in a standby mode after a
set period of time. To reach this menu,
press the
⁄
or
¤
buttons
i
to
position the on-screen cursor
>
next to
SLEEP TIMER
and press
Select
j
.
At the next screen, the
SLEEP TIMER
SET
menu (see figure #16) the cursor
will be next to
TIMER SET
. Use the
‹
or
›
buttons
i
to select the amount of
time before turn off and note that the
time will blink. Press the
time will blink. Press the
¤
button so
that the on-screen cursor
>
is next to
TIMER ON OFF
. Use the
‹
or
›
buttons
i
to highlight
ON
and
press
Select
j
. The time figure will
stop flashing indicating that the timer
has been started. Press
has been started. Press
¤
one more time
so that the cursor is next to
RETURN
TO MAIN MENU
and press select. Note
that when the
MAIN MENU
returns to
the screen the time figure will appear
next to the words
next to the words
SLEEP TIMER
. You
may check the time remaining before
shut off at any time by pressing the
shut off at any time by pressing the
Sleep
button
z
on the remote and
viewing the on-screen display (see figure
#12).
#12).
Position the on-screen cursor
>
next
to
MENU OFF
at any time to exit the
menu system and return to normal
operation.
operation.
27
S L E E P T I M E R S E T
T I M E R S E T 1 0 m i n
T I M E R O F F O N
R E T U R N T O M A I N M E N U
Figure 16
M O D E : P R O L O G I C
D E L A Y T I M E C O N T R O L
C E N T E R C H : N O N E
S U R R O U N D C H : 2 m s
R E T U R N T O M A I N M E N U
S U R R O U N D M O D E
Figure 15
AVR85 om (g) 9/16/98 11:21 AM Page 27
Click on the first or last page to see other AVR 85 (serv.man4) service manuals if exist.