AVR 75 (serv.man3) - Harman Kardon Audio User Guide / Operation Manual. Page 14

Remote Control Functions

12

AVR75 120   rev (c) 8/27/97

v

The memo button is used

to enter stations to the tuner’s preset
memory in either the manual or auto-
matic modes. It is also used in the
process of clearing the memory. This
button also performs the functions 
of the “*” symbol on compatible
equipment.

w

Press this button to

automatically scan through the sta-
tions preset into the tuner memory.
Press the button again to end the
scan when the tuner stops at the
desired station. This button also per-
forms the functions of the “

” symbol

on compatible equipment.

x

These buttons

serve as a ten button numeric key-
pad to enter tuner preset positions.
They are also to be used to select
channel numbers when 

has 

been selected on the remote, or to
select track numbers on a CD, DVD
or LD player, depending on how the
remote has been programmed. 
The letters below the buttons are
used to enter information for tuner
station names.

NOTE:

The

button has a dual func-

tion. It also serves as the

button for use in programming the
tuner or clearing the system memory.

y

Press one of these buttons to select
a surround mode for the current
listening session.

b. When 

is selected and the unit

is a CD changer, these buttons 
will change to the next disc 

∏

or

previous disc 

Â

.

c. When 

or 

is the

input source, and the tape
machine is a compatible Harman
Kardon dual cassette deck, these
buttons will switch between the
“A” and “B” sides. 

u

These buttons

have multiple functions, which
vary according to the input device
selected and the codes programmed
from another remote.

a. When 

, 

or 

are

selected, they may function as 
the channel up 

·

or channel

down 

‡

tuning buttons when

programmed with the codes from
another unit’s remote.

b. When 

is selected these

buttons act as forward and
reverse “Skip” buttons to move 
to the next track or chapter on 
the disc.

c. When a compatible Harman

Kardon cassette player has been
selected as 

or 

,

these buttons move the tape
forward 

·

or backwards 

‡

to

the next selection using the Music
Scan feature.

z

Pressing this button

when the Sleep timer has previously
been activated allows you to view
the time remaining before the timer
function turns the unit off. When the
remote is in the 

mode 

d,

the Sleep function may also be
changed or set by pressing this
button so that the 

and 

indicators 

D N blink. Press the

and 

buttons within five

seconds to set the desired sleep
time in the following order:

When the desired time is shown in
the display press the 

button

%v to enter the time. The unit will
go into the Standby mode when the
time entered has elapsed.

`

This indicator will

illuminate when a button on the
remote is being programmed with
signals from another remote during
the “learning” mode. The light will go
out when the signal is received and
memorized. 

This indicator

should flash any time a button is
pressed to confirm that a command
is being sent to the receiver or
another unit. If the light is dim or
does not illuminate when a button is
pressed the batteries in the remote
should be replaced.

10

min

20

min

30

min

60

min

90

min

OFF

AVR75 om (c)  9/16/98 11:33 AM  Page 12