Read Harman Kardon AVR 460 (serv.man4) EMC - CB Certificate online
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA
Tel:+82-31-490-2534 Fax:+82-31-490-2298
http://www.aname.co.kr
Declaration of Conformity
EMCD ; 2004/108/EC
We : Anam Electronics Co., Ltd.
645, Sungkok-Dong, Ansan-City,Kyungki-Do,425-834,Korea
declares on our own responsibility, that the product:
Kind of equipment
: AV Receiver
Type-designation :
AVR460/230
Brand Name
: Harman/Kardon
Manufacturer
: DongGuan LiaoBu Anam Electronics
Xin Cheng Management Area, LiaoBu Town,
DongGuan City, Guang Dong Province, CHINA
are in compliance with following norm(s) or documents:
Test Report
: Test report No 54120906I, 54120906J of ANAM EMC LAB.
: Test report No LR500120906P of LTA lab in Korea
Standards :
EN55013(2001)
&
+A1(2003) &+ A2(2006)
: EN55020(2007)
: EN61000-3-2(2006)
: EN61000-3-3 (1995)+A1(2001)+A2(2005)
: EN61000-4-2(1995) & + A1(1998) & + A2(2001)
: EN61000-4-3(2002) & + A1(2002)
: EN61000-4-4(2004)
Signature
Date of issue : June 29, 2009
T. Y. Kim / Senior Engineer
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA, 425-110
FAX.: +82-345-490-2539 TEL.: +82-345-490-2282
EMI TEST REPORT
Reference No. 54120906I
Emission of Electromagnetic Disturbances
Equipment Under Test
Equipment
: AV Receiver
Type/Model
: AVR460/230
Brand Name : Harman/Kardon
Manufacturer : DongGuan LiaoBu Anam Electronics
Total page of this report: 58(including this page)
SUMMARY
Referring to the performance criteria and the operation mode during the test specified in
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006) and EN61000-3-2(2006) and EN 61000-3-3
(1995)+A1(2001)+A2(2005). The test results in this report apply only to the sample(s)
tested.
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006) and EN61000-3-2(2006) and EN 61000-3-3
(1995)+A1(2001)+A2(2005). The test results in this report apply only to the sample(s)
tested.
Report Issued : June 29, 2009
EUT Received : May 27, 2009
Tested by: Approved by:
B. S. Lee/Researching Engineer
T. Y. Kim / Senior Engineer
“This report should not be reproduced except in full without the written approval of the testing
laboratory.”
Reference No. : 54120906I Page 2/58
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Radiation
8
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Antenna Terminal Disturbance Voltage
11
7.1. Operating environment
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
Reference No. : 54120906I Page 3/58
◀ Anam EMC Test Laboratory ▶
8. Disturbance Power
13
8.1. Operating environment
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
9. Harmonics
15
9.1. Operating environment
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
10. Flicker
16
10.1. Operating environment
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
11. Photograph of Product
17
12. Photograph of the test set-up
20
Annex - Measurement data;
Annex A: Mains terminal disturbance voltage (6 Copies)
22
Annex B: Disturbance Power (26 Copies)
28
Annex C: Harmonics (3 Copies)
54
Annex D: Voltage fluctuations-flicker (1 Copy)
57