Read Harman Kardon AVR 435 (serv.man5) EMC - CB Certificate online
EMC Test Report
Reference No.: NK2FE 131.EMI
WOORI Technology Inc. Page 24 of 85
AVR435/230 (Harman Kardon)
11. Flicker (EN 61000-3-3)
11.1 Test Procedure
EUT was connected to the Power Analyzer system. Measurements were conducted to obtain the desired
flicker parameters. The measuring time depends on which parameters are to be measured:
◆ 2 hours for Long Time Flicker assessment (Plt)
◆ 10 minutes for Short Time Flicker assessment (Pst)
◆ 1-10 minutes for Dmax, Dc and Dt assessment (depending on EUT switch-rate)
A pure AC mains was supplied to the system from two power supply units. The units supply an AC mains,
free of harmonics, fluctuations or distortion of any kind. A defined impedance was located between the
supply unit and the EUT.
A measurement table and a graphic presentation of the “Worst Case” probability function of Short
Time
Flicker during this session (if measured) are presented in the report.
Instrumentation used during this session:
Instruments Manufacturer
Due
To
Calibration
Profline 2100 System
Schaffner
2005. 09
11.2 Test Parameters
Port:
AC Mains
Basic Standard:
EN 61000-3-3:1995+A1: 2001
Test Engineer:
J. Y. Yu
Measured:
Dmax Dc
Dt Pst
Plt
11.3 Flicker Probability (Pst), Graphic Presentation
Measurement results can be found in the
Appendix D.
Result
Compliant
Click on the first or last page to see other AVR 435 (serv.man5) service manuals if exist.