AVR 430 (serv.man16) - Harman Kardon Audio User Guide / Operation Manual. Page 30

30 OPERATION

DOLBY 3 STEREO

Uses the information contained in a surround-encoded or two-channel stereo program to 

No surround channels

create center-channel information. In addition, the information that is normally sent to the 
rear-channel surround speakers is carefully mixed in with the front-left and front-right 
channels for increased realism. Use this mode when you have a center-channel speaker 
but no surround speakers.

THEATER

The THEATER mode creates a sound field that resembles the acoustic feeling of a 

Delay time not adjustable

standard live performance theater, with stereo and even pure mono sources.

HALL 1

The two Hall modes create sound fields that resemble a small (HALL1) or

Delay time not adjustable

HALL 2

medium sized (HALL 2) concert hall, with stereo and even pure mono sources.

VMAx Near

When only the two front-channel loudspeakers are used, Harman’s patented VMAx mode 

No surround channels

VMAx Far

delivers a three-dimensional sound space with the illusion of “phantom speakers” at the 
center and surround positions. The VMAx N, or “Near Field” mode should be selected when
your listening position is less than 1,5 m from the speakers. The VMAx F, or “Far Field” mode
may be selected when your listening position is greater than 1,5 m from the speakers.
The VMAx modes are also available using the Headphones Output 4. When headphones
are being used, the Far Field mode will push the sound field away from your ears,
reducing the “inside the head” sensation often experienced when using headphones.

Dolby Virtual Speaker Dolby Virtual Speaker technology uses a next-generation advanced algorithm to reproduce the 

No surround channels

Reference

dynamics and surround sound effects of a precisely placed 5.1-channel speaker system using only 

Wide

front left and right speakers. In the Reference Mode, the apparent width of the sound across 
the front image is defined by the distance between the two speakers. The Wide Mode 
provides a wider, more spacious front image when the two speakers areclose together.

5-Channel Stereo

This mode takes advantage of multiple speakers to place a stereo signal at both the front and

No delay available in

7-Channel Stereo

back of a room. Depending on whether the AVR has been configured for either 5.1 or 6.1/7.1 

these modes

operation, one of these modes, but not both, is available at any time. Ideal for playing music in 
situations such as a party, this mode places the same signal at the front-left and surround-left,
and at the front-right and surround-right speakers. The center channel is fed a summed mono 
mix of the in-phase material of the left and right channels.

SURROUND

This mode turns off all surround processing and presents the pure left- and right- 

No surround channels

OFF (STEREO)

channel presentation of two-channel stereo programs.

Dolby Headphone 

Dolby Headphone enables ordinary stereo headphones to portray the sound of a five-speaker 

No surround channels

DH1 

surround-playback system. The DH1 mode creates headphone presentation that resembles a small,

DH2 

well-damped room and is appropriate for use with both movies and music-only recordings.

DH3 

The DH2 mode creates a more acoustically live room particularly suited to music listening.
The DH3 mode creates a larger room, more like a concert hall or movie theater.