Read Harman Kardon AVR 370 (serv.man2) EMC - CB Certificate online
Reference No. : 54121209H Page 14/39
◀ Anam EMC Test Laboratory ▶
8.5. Test protocols
Date: September 18, 2012
The equipment does comply with the requirements. Operating condition: The
EUT continuously operated with audio frequency of 1,000 ㎐ color bar being
supplied from the Oscillator or test CD. An absorbing clamp was placed
around all leads. At each mode, the maximum value at each testing frequency
and each output lead was registered and attached as follows.
Limit(㏈㎺) Result(㏈㎺)
Test Lead
Freq.
(㎒)
QP AV QP AV
PHONES
196.64
50.0 40.0 26.0 20.9
FRONT HDMI
196.64
50.0 40.0 23.9 19.9
PRE OUT
221.19
52.1
42.1
* *
ANALOG IN/OUT
221.19
52.1
42.1
* *
IR IN/OUT
282.63
54.4
44.4
25.4 23.6
COAXIAL
221.19
52.1
42.1
* *
HDMI IN/OUT
196.64
50.0 40.0 *
*
COMPONENT
221.19
52.1
42.1
* *
COMPOSITE
221.19
52.1
42.1
* *
SPEAKER
221.19
52.1
42.1
* *
AC POWER CORD
88.28 47.2 37.2
* *
*: less than 25 ㏈㎺
Limit
according
to
EN55013:2001+A2(2006)
Note:1) The spectrum was checked from 30 to 300 ㎒.
2) The cable (6.0m length) loss is included in a correction factor.
3) Detector function of the measuring instrument:
QP: Quasi-peak, AV: Average
4) QP line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 43.9
AV line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 33.9
5) *: Less than 25 ㏈㎺
For the measurement data, see Annex C (11 Copies).
Click on the first or last page to see other AVR 370 (serv.man2) service manuals if exist.