AVR 347 (serv.man4) - Harman Kardon Audio Service Manual (repair manual). Page 9

Read Harman Kardon AVR 347 (serv.man4) Service Manual online

<13>RS232 PCB(37-7) REMOVAL 
1. Remove the Top-cabinet, referring to the previous step<1>. 
2. Remove the Hudson PCB(42), referring to the previous step<9>. 
3. Remove the Video PCB(41), referring to the previous step<10>. 
4. Disconnect the card cable between connector(CN47-7P) on the iPod PCB(39-2) 
and connector(CN47) on the RS232 PCB(37-7). 
5.Remove 2 screws and then remove the RS232 PCB(37-7).     
 
<14>INPUT PCB(39-1) REMOVAL 
1. Remove the Top-cabinet, referring to the previous step<1>. 
2. Remove the Tuner module(44), referring to the previous step<8>. 
3. Remove the Hudson PCB(42), referring to the previous step<9>. 
4. Remove the Video PCB(41), referring to the previous step<10>. 
5. Disconnect connector(CN20) on the the Input PCB(39-1) 
  from the lead wire(BN20-5P) on the Regulator PCB(B)(40-5). 
6. Disconnect connector(CN22) on the Input PCB(39-1) from the lead wire(BN22-6P) on the Phone PCB(37-5). 
7. Disconnect connector(CN18) on the Input PCB(39-1) from the lead wire(BN18-5P) on the Phone PCB(37-5) 
8. Disconnect connector(CN10) on the Input PCB(39-1) from the lead wire(BN10-4P) on the Volume PCB(37-6).   
9. Disconnect the card cable between connector(CN14) on the Input PCB(39-1). 
and connector(BN14-17P) on the Video PCB(41). 
10. Disconnect the card cable between connector(CN19) on the Input PCB(39-1) 
and connector(BN19-15P) on the I-Pod PCB(39-2). 
11. Disconnect the card cable between connector(CN21) on the input PCB(39-1) 
and connector(BN21-7P) on XM PCB(43). 
12. Disconnect the card cable between connector(CN12-21p) on the Input PCB(39-1) 
and connector(CN12-21p)) on the main PCB(38-1) 
13. Disconnect the card cable between connector(CN11-17p) on the Input PCB(39-1) 
and connector(CN11) on the main PCB(38-1) 
14. Disconnect the card cable between connector(CN72) on the Input PCB(39-1) 
and connector(CN72-17p) on the Fip PCB(37-1) 
15. Disconnect the card cable between connector(CN16-12P) on the Input PCB(39-1) 
and connector(BN16) on the A-BUS PCB(39-3) 
16. Remove 11 screws(S8,S15) and then remove the Input PCB(39-1). 
   
<15>POWER TRANS(36) & POWER PCB ASS’Y(40) REMOVAL 
1. Remove the Top-cabinet, referring to the previous step<1>. 
2. Disconnect    lead wire of the Power Trans(36) from connector (CN91-3P) on the Main PCB(38-1) 
3. Disconnect connector(CN19-3P,CN20-4P) on TRANS PCB(40-3) 
from the lead wire(BN19-3P,BN20-4P) on the Main PCB(38-1). 
4. Disconnect the lead wire(BN96-8P) on the Power PCB(40-4) 
  from connector(CN96) on the Regulator PCB(B)(40-5). 
5. Disconnect the lead wire(BN99-8P) on the Power PCB(40-4) 
  from connector(CN99) on the Regulator PCB(A)(40-2). 
6. Disconnect    connector(CN81) on the Trans PCB(40-4) from the lead wire(BN81-8P) on the Fip PCB(37-1). 
7. Remove 4 Trans screws(S9) and then remove the Power Trans(36)& Power PCB ASS’Y(40) REMOVAL .   
 
<16>REMOTE PCB ASS’Y(40-7) REMOVAL   
1. Remove the Top-cabinet, referring to the previous step<1>. 
2.Disconnect    connector(CN88) on the remote PCB(40-7) from the lead wire(BN88-6P) on the Main PCB(38-1)   
3. Remove 3screws(S13) and then remove the Remote PCB ASS’Y(40-7). 
 
<17>A-BUS’Y(39-3) REMOVAL   
1. Remove the Top-cabinet, referring to the previous step<1>. 
2. Disconnect connector(CN90-2P) on the Regulator(C) PCB(39-6)   
harman/kardon
AVR 347/230 - AVR 350/230 Service Manual
Page 9 of 95
Page of 95
Display

Click on the first or last page to see other AVR 347 (serv.man4) service manuals if exist.