AVR 335 - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 7

Reference No. : 54120503C                                                                                                                        Page 5

 

◀  Anam EMC Test Laboratory  ▶

 

 

 

The test have been performed on the EUT provided with the following 

modifications: None. 

 
3.TEST SPECIFICATIONS 

 

   3.1. Standards 
 *EN55013 

(2001): 

Sound and Television broadcast receivers and Associated equipment 
-Radio Disturbance characteristics - Limits and methods of measurement. 

 *EN61000-3-2 

(2000): 

Part 3-2: Limits- Limits for harmonic current emissions 
 

(Equipment input current  ≤16A per phase) 

 

*EN61000-3-3 (1995 +Amd.1;2001): 

 

 Part 3-3: Limits- Limitation of voltage changes, voltage fluctuations and 
flicker in public low-voltage supply systems for equipment with rated 
current  ≤16A. 

      3.2. Additions, deviations and exclusions from standard 
 

No additions, deviations or exclusions have been made from standard. 

 
      3.3. Purpose of the test: 
 

To determine whether the EUT fulfils the EMC-emission requirements of the   

 

Standards stated in section 3.1. 

 
      3.4. Mode of operation during the test 
 

The EUT was operated in such a way as to deliver one-eighth on the non-clipped 

 

output power to the rated load impedance using the sinusoidal of 1 ㎑. 

 

The EUT was set to the mode of Tuner. 

 

4.TEST SUMMARY 

 

The results in this report apply only to sample(s) tested: 

Test item 

Passed 

the test 

Note 

Mains terminal disturbance voltage 

Yes 

 

Disturbance Radiation 

Yes 

 

Antenna Terminal Disturbance Voltage 

Yes 

 

Disturbance Power 

Yes 

 

Harmonics Yes 

 

Voltage Fluctuations-Flicker 

Yes 

 

 

The equipment does comply with the requirements.