Read Harman Kardon AVR 265 (serv.man4) EMC - CB Certificate online
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA
Tel:+82-31-490-2283 Fax:+82-31-490-2298
http://www.aname.co.kr
Declaration of Conformity
EMCD ; 2004/108/EC
We : Anam Electronics Co., Ltd.
645, Sungkok-Dong, Ansan-City,Kyungki-Do,425-834,Korea
declares on our own responsibility, that the product:
Kind of equipment
: AV Receiver
Type-designation :
AVR265/230
Brand Name
: Harman/Kardon
Manufacturer
: DongGuan LiaoBu Anam Electronics
Xin Cheng Management Area, LiaoBu Town,
DongGuan City, Guang Dong Province, CHINA
are in compliance with following norm(s) or documents:
Test Report
: Test report No 54121102I, 54121102J of ANAM EMC LAB.
: Test report No ETLE110112.0019 of ETL
Standards :
EN55013(2001)
&
+A1(2003) &+ A2(2006)
: EN55020(2007)
: EN55022(2006)(Class B)
: EN55024(1998) & +A1(2001) &+ A2(2003)
: EN61000-3-2(2006)
: EN61000-3-3(2008)
: EN61000-4-2(1995) & + A1(1998) & + A2(2001)
: EN61000-4-3(2006)
: EN61000-4-4(2004)
Signature
Date of issue : February 25, 2011
T. Y. Kim / General Manager
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA, 425-110
TEL.: +82-31-490-2283
EMI TEST REPORT
Reference No. 54121102I
Emission of Electromagnetic Disturbances
Equipment Under Test
Equipment
: AV Receiver
Type/Model
: AVR265/230
Brand Name : Harman/Kardon
Manufacturer : DongGuan LiaoBu Anam Electronics
Total page of this report: 5
5 (including this page)
SUMMARY
Referring to the performance criteria and the operation mode during the test specified in
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006) and EN61000-3-2(2006) and EN 61000-3-3(2008). The
test results in this report apply only to the sample(s) tested.
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006) and EN61000-3-2(2006) and EN 61000-3-3(2008). The
test results in this report apply only to the sample(s) tested.
Report Issued : February 25, 2011 EUT Received : February 24, 2011
Tested by: Approved by:
B. S. Lee/ Researching Engineer
T. Y. Kim /General Manager
“This report should not be reproduced except in full without the written approval of the testing
laboratory.”
Reference No. : 54121102I Page 2/55
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Radiation
8
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Antenna Terminal Disturbance Voltage
11
7.1. Operating environment
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
Reference No. : 54121102I Page 3/55
◀ Anam EMC Test Laboratory ▶
8. Disturbance Power
13
8.1. Operating environment
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
9. Harmonics
15
9.1. Operating environment
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
10. Flicker
16
10.1. Operating environment
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
11. Photograph of Product
17
12. Photograph of the test set-up
19
Annex - Measurement data;
Annex A : Mains terminal disturbance voltage (6 Copies)
22
Annex B : Antenna terminal disturbance voltage (3 Copies)
28
Annex C : Disturbance Power (21 Copies)
31
Annex D : Harmonics (3 Copies)
52
Annex E : Voltage fluctuations-flicker (1 Copy)
55
