AVR 171 - Harman Kardon Audio Service Manual (repair manual)

avr 171 service manual
Model
AVR 171
Pages
127
Size
18.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
avr-171.pdf
Date

Read Harman Kardon AVR 171 Service Manual online

Harman Kardon
 
 Service Manual
AVR 171/230 
7.2 CHANNEL 100 Watt per channel A/V RECEIVER 
Released EU2013 
Harman Consumer Group, Inc. 
Rev 
.1, 03/2016
       8500 Balboa Boulevard 
   Northridge, California 91329 
CONTENTS 
EXPLODED VIEW AND PARTS 
14 
PARTS LIST   
15 
BIAS ADJUSTMENT   
49 
SEMICONDUCTOR PINOUTS 
50 
PCB DRAWINGS 
149 
BLOCK DIAGRAMS   
159 
WIRING DIAGRAM   
161 
SCHEMATIC DIAGRAMS 
162 
 
FRONT PANEL CONTROLS  
REAR PANEL CONNECTORS 
REMOTE CONTROL FUNCTIONS 
PROCESSOR RESET 
TROUBLESHOOTING 
10 
SPECIFICATIONS 
11 
PACKAGE DRAWING 
12 
DISASSEMBLY 
13 
®
Audio/video receiver
AVR 1710, AVR 171, AVR 171/230C 
AVR 1610, AVR 161, AVR 161/230C
Owner’s Manual
Harman Kardon
AVR 171 Service Manual
Page 2 of 174
AVR
Front-Panel Controls
Front-Panel Controls
power 
Indicator
Front-panel 
display
Volume 
knob
Set 
button
Ir 
Sensor
power 
button
left/right 
buttons
headphone Jack/ 
ezSet/eq  
Mic Input
Audio Input 
button
Surround Modes 
Select buttons
Surround Mode 
category button
up/down buttons/ 
tuning buttons
uSb 
port
tuning Mode button (AVr 
1710/AVr 1610)/
rdS button (AVr 171/
AVr 161)
channel Volume 
Adjust button
Source Select 
buttons
4
Harman Kardon
AVR 171 Service Manual
Page 3 of 174
English
AVR
Front-Panel Controls
Front-Panel Controls, continued
Power indicator/Power button: the AVr has three different power modes:
off (power indicator glows solid amber): the off mode minimizes energy consumption 
when you’re not using the AVr. when the AVr is off, it will not automatically turn on 
or play audio in response to an Airplay stream from a networked device (AVr 1710/
AVr 171 only). when the AVr is off, pressing the power button turns it on. to turn 
the AVr off when it is on, press the power button for more than three seconds. the 
Front-panel display will indicate “Your device is switched off” for two seconds, then 
will switch off. 
note: You can use the System Setup menu to set the AVr to automatically enter 
the off mode after it has been in the Sleep mode for a certain period of time. See 
System Settings, on page 34.
Sleep 
(power indicator glows solid amber and front-panel display indicates “device 
sleep”): the Sleep mode powers-down some of the AVr’s circuitry, but allows the 
AVr  to  automatically  turn  on  and  play  audio  in  response  to  an Airplay  or  dlnA 
dMr stream from a networked device (AVr 1710/AVr 171 only). when the AVr is 
in Sleep, pressing the power button turns it on. to put the AVr into Sleep when it is 
on, press the power button for less than three seconds. the front-panel display will 
indicate “device sleep” while the AVr is in the Sleep mode. 
note: the AVr will automatically enter the Sleep mode after 30 minutes of no audio 
signal or user control input , unless uSb, ipod, home network, vtuner, Airplay, or 
dlnA dMr is active. In these cases, the AVr will automatically enter the Sleep mode 
after the number of hours set in the Auto power off system setting. See System 
Settings, on page 34.
On 
(power indicator glows solid white): when the AVr is on it is fully operational.
Headphone jack/EzSet/EQ Mic input: connect a 1/4” stereo headphone plug to this 
jack for private listening. this jack is also used to connect the supplied microphone for 
the ezSet/eq setup procedure described in Configure the AVR For Your Speakers, on 
page 22.
Tuning Mode button (AVR 1710/AVR 1610 only): press this button to toggle the radio 
between the manual (one frequency step at a time) and automatic (seeks frequencies 
with  acceptable  signal  strength)  FM  tuning  mode. the  button  also  toggles  the  radio 
between stereo and mono modes when an FM station is tuned in.
RDS  button  (AVR  171/AVR  161  only):  when  listening  to  an  FM  radio  station  that 
broadcasts rdS information, this button activates the various rdS functions.
USB  port: the  uSb  port  can  be  used  to  play  audio  files  from  an Apple  ioS
®
  device 
connected to the port, and can also be used to play Mp3 and wMA audio files from a uSb 
device inserted into the port. Insert the connector or device into the uSb port oriented so 
it fits all the way into the port. You may insert or remove the connector or device at any 
time – there is no installation or ejection procedure.
You can also use the uSb port to perform firmware upgrades. If an upgrade for the AVr’s 
operating system is released in the future, you will be able to download it to the AVr 
using this port. complete instructions will be provided at that time.
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or you 
may damage both the AVR and the other device. 
Channel Volume Adjust button: 
press this button to activate the individual channel 
level adjustment. After pressing this button, use the up/down buttons/tuning buttons to 
select the channel for adjustment and use theleft/right buttons to adjust the channel’s 
level.
Audio Input button: press this button to change the audio input connection for the current 
source. use the left/right buttons to cycle through the available input connections, and 
press the Set button to assign the currently-displayed connection to the source. 
IR sensor: this sensor receives infrared (Ir) commands from the remote control. Make 
sure that the sensor is not blocked.
Set button: press this button to select the currently highlighted menu item.
Left/Right buttons: use these buttons to navigate the AVr’s menus.
Front-panel display: Various messages appear on this two-line display in response to 
commands and changes in the incoming signal. In normal operation, the current source 
name appears on the upper line, while the active surround mode is displayed on the 
lower line. when the on-screen display menu system (oSd) is in use, the current menu 
settings appear.
Up/Down buttons/Tuning buttons: use these buttons to navigate the AVr’s menus. 
when the radio is the active source, use these buttons to tune stations according to the 
setting of the tuning Mode button (see above).
Surround  Mode  Category  button:  press  this  button  to  select  a  surround-sound 
category. each press changes the surround-mode category: Auto Select, Virtual, Stereo, 
hArMAn nSp, Movie, Music and Video game. to change the specific surround-sound 
mode within the category, use the Surround Mode Select buttons. See Audio Processing 
and Surround Sound, on page 29, for more information about surround modes.
Surround Mode Select buttons: After you have selected the desired surround-mode 
category, press these buttons to select a specific mode within the category, such as to 
change from dolby
®
 pro logic
®
 II Movie mode to dtS
®
 neo:6 cinema mode. Surround 
mode availability depends on the nature of the source input signal, i.e., digital versus 
analog, and the number of channels encoded within the signal.
Source Select buttons: press these buttons to select the active source.
Volume knob: turn this knob to raise or lower the volume.
5
Harman Kardon
AVR 171 Service Manual
Page 4 of 174
Page of 127
Display

Download Harman Kardon AVR 171 Service Manual (Repair Manual)

Here you can read online and download Harman Kardon AVR 171 Service Manual in PDF. AVR 171 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Harman Kardon AVR 171 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.