Read Harman Kardon AVR 170 (serv.man2) EMC - CB Certificate online
Reference No. : 54121205C Page 14/40
◀ Anam EMC Test Laboratory ▶
8.5. Test protocols
Date: May 25, 2012
The equipment does comply with the requirements. Operating condition: The
EUT continuously operated with audio frequency of 1,000 ㎐ color bar being
supplied from the Oscillator or test CD. An absorbing clamp was placed
around all leads. At each mode, the maximum value at each testing frequency
and each output lead was registered and attached as follows.
Test Lead
Freq.
(㎒)
Limit(㏈㎺) Result(㏈㎺)
QP AV QP AV
PHONES
43.50
45.5 35.5 38.7 21.3
AUX
172.03
50.3
40.3
24.3 20.8
REC OUT
150.00
49.5 39.5 *
*
ANALOG IN
150.00
49.5 39.5 *
*
COAXIAL
150.00
49.5 39.5 *
*
COMPOSITE
150.00
49.5 39.5 *
*
SUBWOOFER PRE OUT
150.00
49.5 39.5 *
*
HDMI IN/OUT
172.03
50.3
40.3
* *
SPEAKER
172.03
50.3
40.3
23.3 19.5
AC POWER CORD
172.03
50.3
40.3
22.5 18.3
TRIGGER OUT
172.03
50.3
40.3
* *
IR IN
172.03
50.3
40.3
* *
*: less than 25 ㏈㎺
Limit
according
to
EN55013:2001+A2(2006)
Note:1) The spectrum was checked from 30 to 300 ㎒.
2) The cable (6.0m length) loss is included in a correction factor.
3) Detector function of the measuring instrument:
QP: Quasi-peak, AV: Average
4) QP line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 43.9
AV line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 33.9
5) *: Less than 25 ㏈㎺
For the measurement data, see Annex C (12 Copies).
Click on the first or last page to see other AVR 170 (serv.man2) service manuals if exist.