Read Harman Kardon AVR 165 (serv.man4) EMC - CB Certificate online
Anam Electronics Co., Ltd. Page 5 of 17
AVR165/230
EMC Test Report
Reference No.:NK-11-E-005
3. General Test Conditions
3.1 Location
NEMKO KOREA
300-2, Osan-Ri, Mohyeon-Myeon, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, KOREA 449-852
Phone : + 82 31 322 2333 Fax : + 82 31 322 2332
3.2 Operating Environment
All tests and measurements were performed in a shielded enclosure or a controlled environment
suitable for the tests conducted. The climatic conditions in the test area are automatically controlled
and recorded continuously.
Recording during test
Accepted deviation
Parameters
ESD Test
Others Test
ESD Test
Others Test
Ambient temperature
(21.1 ~ 22.1 ℃)
(15 ~ 35 ℃)
Relative humidity
32.0 % R.H.
31.0 ~ 33.0 % R.H.
30 ~ 60 % R.H.
75 or less % R.H.
Atmospheric pressure
100.1 ~ 100.5 kPa
86 ~ 106 kPa
3.3 Operating During Test
●The EUT was connected to RC oscillator, Dummy load (8Ω) and adjusted to 1 / 8 of the rated power using the
FM/AM signal generator with the sinusoidal of 1 kHz.
During the tests, 1 kHz waveform was observed via oscilloscope.
3.4 Test Equipment
●The test equipment used in testing are calibrated on a regular basis. For most of the testing
equipment accredited calibration is conducted once a year. For certain equipment the calibration
interval is longer. Between the calibrations all test equipment are controlled and verified on a
regular basis. The test equipments used are defined in each test section of this report.
3.5 EUT & Support Equipment
Equipment Manufacturer
Model
Serial
Number
AV Receiver (EUT)
DongGuan LiaoBu
Anam Electronics
Anam Electronics
AVR165/230 N/A
RC Oscillator
KIKUSUI ELECTONICS
ORC11
10123756
FM/AM
Signal Generator
Signal Generator
Panasonic VP-8174A
110487B122
Oscilloscope EZ
Digital
OS-5060A 1040290
Dummy load (8Ω)
N/A N/A
N/A
Headphone SOYA
DIGITAL
READY
N/A
USB Memory
N/A
USM256D
N/A
Click on the first or last page to see other AVR 165 (serv.man4) service manuals if exist.