AVR 165 (serv.man3) - Harman Kardon Audio Technical Bulletin (repair manual)

avr 165 (serv.man3) technical bulletin
Model
AVR 165 (serv.man3)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
467.97 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Audio
File
avr-165-sm3.pdf
Date

Read Harman Kardon AVR 165 (serv.man3) Technical Bulletin online

harman/kardon
   
         ServiceBulletin 
AVR 156/158/165 
 
 
 
April 2012 
                               
                                                
 
Harman International 
                              8500 Balboa Blvd., Northridge, CA 91329, USA 
Service bulletin # HK2012-001 
 
 
 
 
 
                                   
 
  
To:   
All Harman Kardon Service Centers 
   Models: 
AVR156/158/165 
Subject: 
White/blob noise in one or more speakers 
In the event you receive a unit with the complaint “White/blob noise in one or more speakers”. 
Perform the following repair: Replace capacitor C940 on HDMI board. 
Parts: 1 x SMD capacitor type: 1206, 22uF/10V, multilayer ceramic chip. Part number: “6911212” (10 pcs) 
Please make sure that you are working in an ESD-protected area! 
Procedure: 
1)  Remove (13) top cover screws: There are (3) on each side and (7) on the back.  
2)  Remove the top cover. 
3)  Remove (4) screws - (5) screws on AVR165 – on back panel from HDMI board. 
4)  Disconnect flat wire connector WF105 on HDMI board. 
5)  Disconnect CN82 on input board. 
                                                                CN82 
                                                                                                                                                                                         
                
WF105 
harman/kardon
   
         ServiceBulletin 
AVR 156/158/165 
 
 
 
April 2012 
                               
                                                
 
Harman International 
                              8500 Balboa Blvd., Northridge, CA 91329, USA 
6)  Gently disconnect the HDMI board from connector CN41 on the video board. 
7)  Remove the flat wire WF104 from HDMI board. 
                                                                    WF104      CN41 
8)  Remove the HDMI board and locate C940 on the bottom side at the PCB. 
9)  Replace C940 with type: 1206, 22uF/10V, multilayer ceramic chip, part number: “6911212”  
Note: Only use of capacitor type: 1206, 22uF/10V, multilayer ceramic chip – Other types will cause 
noise!
                          C940 
10) Remount HDMI board. Reconnect connectors and reassemble in reverse order from 1-3. 
11) Test the unit. 
Model 
Serial number  Status 
Action 
PN used 
AVR 156/158/165 
All  
White/blob noise in speakers 
Replace capacitor C940 
6911212  
(10 pcs)
Page of 2
Display

Download Harman Kardon AVR 165 (serv.man3) Technical Bulletin

Here you can read online and download Harman Kardon AVR 165 (serv.man3) Technical Bulletin in PDF. AVR 165 (serv.man3) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Harman Kardon AVR 165 (serv.man3) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.