Read Harman Kardon AVR 151 (serv.man4) EMC - CB Certificate online
Reference No.: 54121302D
Page 6/32
6. Immunity to RF voltages(S2a)
6.1 Test criteria and test procedure
Operating environment;
Temperature
Temperature
: 17 ℃
Relative Humidity
: 42 %
The EUT was placed 0.1m above a metallic ground plane of dimensions 2 x1m.
The wanted signal was fed to all input terminals respectively and the
unwanted signal was fed to mains input, audio output and input terminals
respectively.
The wanted signal was fed to all input terminals respectively and the
unwanted signal was fed to mains input, audio output and input terminals
respectively.
The criterion concerning acceptable sound interference is a wanted to
unwanted audio signal ratio of ≥40dB at a wanted signal level of 50mW.
unwanted audio signal ratio of ≥40dB at a wanted signal level of 50mW.
The audio output power was measured with a 0.5 - 3kHz band-pass filter.
The audio analyzer was applied without a weighting filter.
The ground connection of the input matching network(Rci), output matching
network(Rco), and mains filter(MSF) were directly connected to the metal table.
The mains filter(MSF) was connected to ground while the other matching
networks are only connected to ground when they are being used as injection
ports.
The audio analyzer was applied without a weighting filter.
The ground connection of the input matching network(Rci), output matching
network(Rco), and mains filter(MSF) were directly connected to the metal table.
The mains filter(MSF) was connected to ground while the other matching
networks are only connected to ground when they are being used as injection
ports.
The measurement are performed with TS9980
6.2 Measurement uncertainty
Immunity to conducted voltage : ± 2dB.
6.3 Test result immunity to conducted voltage.
The equipment does comply with the requirements.
For the measurement data, see annex B.
◀
Anam EMC Test Laboratory ▶
Click on the first or last page to see other AVR 151 (serv.man4) service manuals if exist.