Read Harman Kardon AVR 135 (serv.man2) EMC - CB Certificate online
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA, 425-110
FAX.: +82-345-490-2539 TEL.: +82-345-490-2282
EMI TEST REPORT
Reference No. 54120503A
Emission of Electromagnetic Disturbances
Equipment Under Test
Equipment
: Audio Video Surround Receiver
Type/Model
: AVR 135/230
Brand Name : Harman/Kardon
Manufacturer : Anam Electronics Co., Ltd. or
DongGuan LiaoBu Anam Electronics
Total page of this report: 64 (including this page)
SUMMARY
Referring to the performance criteria and the operation mode during the test specified in
this report the equipment does comply with the requirements according to EN
55013(2001) and EN 61000-3-2 (2000) and EN 61000-3-3 (1995)+A1(2001).
The test results in this report apply only to the sample(s) tested.
this report the equipment does comply with the requirements according to EN
55013(2001) and EN 61000-3-2 (2000) and EN 61000-3-3 (1995)+A1(2001).
The test results in this report apply only to the sample(s) tested.
Roport Issued : March 2, 2005
EUT Received : November 1, 2004
Tested by: Approved by:
B. S. Lee/Engineer
Reviewed by:
D. G. Kim/Senior Engineer H.W. Lee/Director
“This report should not be reproduced except in full without the written approval of the testing
laboratory.”
Reference No. : 54120503A Page 2
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Radiation
8
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Antenna Terminal Disturbance Voltage
11
7.1. Operating environment
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
