AVR 100 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 10

REAR-PANEL CONNECTIONS  9

¡ AM Antenna: Connect the AM loop
antenna supplied with the receiver to these
terminals. If an external AM antenna is used,
make connections to the AM and GND terminals
in accordance with the instructions supplied
with the antenna.

™ FM Antenna: Connect the supplied indoor
or an optional external FM antenna to this
terminal.

£ Remote IR Input: If the AVR 100RDS’s
front-panel IR sensor is blocked due to cabinet
doors or other obstructions, an external IR
sensor may be used. Connect the output of the
sensor to this jack.

¢ Remote IR Output: This connection
permits the IR sensor in the receiver to serve
other remote-controlled devices. Connect this
jack to the “IR IN” jack on compatible
equipment.

∞ Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If
an external subwoofer amplifier is used,
connect this jack to the subwoofer amplifier
input.

§ DVD Inputs: Connect the analog audio
outputs and composite video output of a DVD
or LD player to these jacks.

¶ CD Inputs: Connect these jacks to the
analog output of a compact disc player or CD
changer.

• Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.

ª Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.

‚ Video Monitor Output: Connect this jack
to the composite video input of a TV monitor or
video projector to view the output of any
standard video source selected by the receiver’s
video switcher.

⁄ Speaker Terminals: Connect these
terminals to the appropriate speakers, following
the designations shown.

NOTE: When making connections to the
Speaker Terminals always be certain to maintain
correct polarity between the speaker’s terminals
and those on the AVR by connecting red (+)
terminals to red, and black (–) terminals to
black. (See page 13 for more information on
speaker polarity.)

¤ Switched AC Outlet: This outlet may be
used to power any device that you wish to have
turn on when the unit is turned on with the
System Power Control switch 2.

NOTE: The power consumption of the device
plugged into this outlet ¤ should not exceed
100 watts.

‹ AC Power Cord: Connect the AC plug to a
nonswitched AC wall output.

› Video 2 Inputs: Connect these jacks to the
audio and video outputs of a TV Tuner, Cable TV
converter box, satellite receiver or any other
audio/video source.