Read Harman Kardon AVI 250 (serv.man9) User Guide / Operation Manual online
Multiroom Operation
29
ENGLISH
2. Press the
›
button
q
until the
desired input source for the multi room
system is selected.
system is selected.
3. When the source is selected, press the
¤
button until the
>
cursor is next to
RETURN TO MAIN MENU
. Press
SELECT
.
4. At the
MAIN MENU
, press the
¤
button once so that the
>
cursor is
pointing to
SET UP MENU
. Press
SELECT
.
5. This will bring
SET UP MENU 1
(Figure #2) to the screen. Press the
¤
button twice until the
>
cursor is
pointing to
GO TO SET UP MENU 2
.
Press
SELECT
.
6. When
SET UP MENU 2
(Figure
#3) appears, the
>
cursor will be pointing
to
M ULT I R M V O L
. Use the
‹
or
›
buttons
q
on the remote to select one of
the following choices.
a. If the remote room is equipped
with a remote receiver only, volume
control will be performed by the
AVI250 using a remote control in
the second room. For this type of
control, select the
with a remote receiver only, volume
control will be performed by the
AVI250 using a remote control in
the second room. For this type of
control, select the
VARIABLE
option.
b. If the volume control in the remote
room will be controlled by the
amplifier in the remote room, or if a
specialized amplifier such as the
AudioAccess AVX-603 will be used,
select
room will be controlled by the
amplifier in the remote room, or if a
specialized amplifier such as the
AudioAccess AVX-603 will be used,
select
FIXED
.
7. After making a selection, press the
¤
button once so that the
>
cursor is next
to
SET LEVEL
.
8. Use the
‹
or
›
buttons
q
on the
remote to establish a volume level for
turn on or constant level, as determined
by the previous selection.
turn on or constant level, as determined
by the previous selection.
a. If
VARIABLE
volume has been
selected, this setting will determine
the volume level for the remote room
each time it is turned on.
the volume level for the remote room
each time it is turned on.
b. If
FIXED
volume has been
selected, this level will be the constant
volume level at the remote room
location unless a local volume
control is installed. Set the level as
close to “0 dB” as possible without
distorting the output signal.
volume level at the remote room
location unless a local volume
control is installed. Set the level as
close to “0 dB” as possible without
distorting the output signal.
9. When the level has been entered, press
the
the
¤
button so that the
>
cursor is
pointing to
RETURN TO MAIN
MENU
and press
SELECT
.
10. At the
MAIN MENU
, use the
navigational arrow buttons on the remote
to exit from the main system.
to exit from the main system.
The AVI250 is now configured for multi
room operation.
room operation.
Operation
Multi room operation is simple, and it
may be controlled from either the main
listening room where the AVI250 is
located, or from a remote room where an
IR receiver or Harman Kardon or Audio
Access keypad has been installed.
Multi room operation is simple, and it
may be controlled from either the main
listening room where the AVI250 is
located, or from a remote room where an
IR receiver or Harman Kardon or Audio
Access keypad has been installed.
Main Room Operation
In this option, the remote room feed is
controlled from the main listening room
using the AVI250’s front panel controls.
In this option, the remote room feed is
controlled from the main listening room
using the AVI250’s front panel controls.
M U L T I R O O M S E L E C T O R
> S E L E C T E D : T U N E R T V
C D L D
T A P E 1 V C R 1
O F F T A P E 2 V C R 2
A U X
R E T U R N T O M A I N M E N U
Figure 17
T U R N M U L T I - Z O N E O F F
?
U S E R S M A Y B E L I S T E N I N G
I N O T H E R R O O M S
P R E S S A G A I N T O P R O C E E D
O R " C L E A R " T O C A N C E L
Figure 18
Engelsk manual AVI250 11/01/98 8:53 Side 29
Click on the first or last page to see other AVI 250 (serv.man9) service manuals if exist.