AVAP1G (serv.man7) - Harman Kardon Audio User Guide / Operation Manual. Page 9

Main  In
When a separate pre-amplifier is
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
NOTE: When you do not use the PRE
OUT and MAIN IN separately, always
connect the PRE OUT and MAIN IN
jacks with the jumper plugs.

Connect a powered subwoofer to these
jacks. This output may also be used
for any external component requiring
a full range volume level input.

Connect the front left (L) and right (R)
speakers to the corresponding
terminals. Make sure that the positive
(+ or red) and negative (- or black)
terminals on the speakers are
connected to the corresponding
terminals on the receiver.

Connect the center and rear speakers
to the corresponding terminals. Make
sure that the positive (+ or red) and
negative (- or black) terminals on the
speakers are connected to the corre-
sponding terminals on the receiver.
When you connect the rear speakers,
connect both L and R speakers.
PLEASE NOTE: Sound will not be
provided through the rear speakers
unless both speakers are connected.

Plug this cord in AC outlet on a wall.

These outlets provides AC power. The
AC power is switched by the power
button of this receiver. Use this outlet
for a CD player or a cassette deck.

7

ENGLISH

AVR10 engelsk  11/01/98 10:10  Side 7