Read Sony SLV-E160EE / SLV-E290EE / SLV-E290EG / SLV-E410AP / SLV-E410CP / SLV-E410EE / SLV-E410EX / SLV-E410IT / SLV-E410UX / SLV-E410VP Service Manual online
— 5 —
SLV-E160EE/E290EE/E290EG/E410AP/E410CP
E410EE/E410EX/E410IT/E410UX/E410VP
SERVICE NOTE
1.
HOW TO RETURN THE PINCH
ROLLER, GUIDE ROLLER AND
ELEVATOR CAM TO STOP MODE
ROLLER, GUIDE ROLLER AND
ELEVATOR CAM TO STOP MODE
1) Remove the VHS MD assembly from the machine. (Refer to
section 2-4. Removal.)
2) Rotate the worm gear-1 of the cam motor beneath the MD
assembly in the direction arrow A using a screw driver tip.
Fig. 1
2.
HOW TO RETURN A TAPE INTO
CASSETTE HALF
CASSETTE HALF
A tape can be rewound into a cassette half by rotating the
flywheel-1 of the capstan motor in the direction of A with hand.
Fig. 2
3.
HOW TO REMOVE A CASSETTE
FROM A MACHINE IF A CASSETTE
IS LEFT IN A MACHINE IN TROUBLE
FROM A MACHINE IF A CASSETTE
IS LEFT IN A MACHINE IN TROUBLE
Execute the section 2, and keep rotating the flywheel-1.
4.
HOW TO REMOVE DRUM
ASSEMBLY
ASSEMBLY
Fig. 3
When executing section 1 to 3, take care that a tape slack
should not be caught by a mechanism or a tape should not
be damaged.
q
Worm gear-1
Cam motor
Front side of the
machine
machine
A
Flywheel-1
Timing belt
Front side
Drum assembly
q
Remove connector
CN001 from RP-196
board.
board.
w
Screw +P3
×
8
Click on the first or last page to see other SLV-E160EE / SLV-E290EE / SLV-E290EG / SLV-E410AP / SLV-E410CP / SLV-E410EE / SLV-E410EX / SLV-E410IT / SLV-E410UX / SLV-E410VP service manuals if exist.