Read Sony KV-28FS20U Service Manual online
14
26
Additional Information
Specifications
TV system
I
Colour system
PAL
NTSC 3.58, 4.43 (only Video In)
NTSC 3.58, 4.43 (only Video In)
Channel coverage
UHF:B21-B69
Picture tube
FD Trinitron WIDE
Approx 71cm (28inches) (Approx 66cm picture measured diagonally), 102° deflection
Approx 71cm (28inches) (Approx 66cm picture measured diagonally), 102° deflection
Rear Terminals
21-pin Euro connector (CENELEC standard) including audio/video
input, RGB input, TV audio/video output.
input, RGB input, TV audio/video output.
/
21-pin Euro connector (CENELEC standard) including audio/video
input, S-video input, Monitor audio/video output.
Audio outputs - phono jacks
Front Terminals
Video input -phono jacks
Audio inputs - phono jacks
S video input - 4 pin DIN
Headphones jack - minijack stereo
Audio inputs - phono jacks
S video input - 4 pin DIN
Headphones jack - minijack stereo
Sound output
Left/Right: 2x20W
(music
power)
Sub woofer:
20W (music power)
Centre
1x10W (music power)
Surround
2x5W (music power)
Power consumption
123W
Dimensions (wxhxd)
Approx. 761x496x525mm
Weight
Approx. 44.0kg
Accessories supplied
RM-887 remote control (1)
IEC designated size AA battery (2)
Centre speaker (1)
Surround speaker (2)
IEC designated size AA battery (2)
Centre speaker (1)
Surround speaker (2)
Other features
Teletext, Smartlink
Design and specifications are subject to change without notice.
1
2
s
2
3
3
3
s
27
Additional Information
Here are some simple solutions to problems which may affect the picture and sound.
•
If you continue to have these problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
Troubleshooting
Problem
Solution
No picture (screen is dark), no sound
•
Plug the TV in.
•
Press the
button on the front of the TV.
•
If the
indicator is on press the
button or a numbered
button on the remote control.
•
Check the aerial connection.
•
Turn the TV off for 3 or 4 seconds and then turn it on again
using the
using the
button on the front of the TV.
Poor or no picture (screen is dark), but
good sound.
good sound.
•
Using the MENU system, select the Picture
Adjustment display. Adjust the brightness, picture and colour
balance levels.
Adjustment display. Adjust the brightness, picture and colour
balance levels.
•
From the Picture Adjustment display select Reset to return to
the factory settings.
the factory settings.
Poor picture quality when watching
an RGB video source.
an RGB video source.
•
Press the
button repeatedly on the remote control until
the RGB symbol
is displayed on the screen.
Good picture, no sound
•
Press the
button on the remote control.
•
If
is displayed on the screen, press the
button on the
remote control.
No colour on colour programmes
•
Using the MENU system, select the Picture Adjustment
display and adjust the colour setting.
display and adjust the colour setting.
•
From the Picture Adjustment display select Reset to return to
the factory settings.
the factory settings.
Distorted picture when changing
programmes or selecting Teletext
programmes or selecting Teletext
•
Turn off any equipment connected to the scart connectors on
the rear of the TV.
the rear of the TV.
Remote control does not function
•
Replace the batteries.
The standby indicator
on the TV
flashes
•
Contact your nearest Sony service centre.
No Sound
•
Check that the button marked
on the rear of the TV is
not pressed in.
/
Click on the first or last page to see other KV-28FS20U service manuals if exist.