Read Sony KDL-32V2500 / KDL-40V2500 / KDL-46V2500 Service Manual online
– 13 –
WAX2T
RM-ED008
Set-up menu
You can select the options listed below on the Set-up
menu. To select options in “Settings”, see “Navigating
through menus” (page
20).
Auto Start-up
Starts the “first time operation menu” to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page
5, 6). However, this
option allows you to repeat th
e process (e.g., to retune the TV after moving house,
or to search for new channels that
have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on
the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
1
Press
F
/
f
to select the desired input source
, then press
.
2
Press
F
/
f
to select the desired option belo
w
, then press
.
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels”
(page
29).
“Skip”: Skips an input source that is not connected to an
y equipment when you press
to select the input source.
Auto S Video
Selects the input signal from S video sockets
6 when
/
6 sock
ets are both
connected.
Timer Settings
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV
automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
(T
imer) indicator on the TV (front) lights
up in orange.
Tips
•
If you switch off the TV and switch it on
again, “Sleep Timer” is reset to “Off”.
•
“TV will soon turn off by sleep timer.” appears on the screen one minute before the TV
switches to standby mode.
PC Settings menu
You can select the options listed below on the PC
Settings menu. To select options in “Settings”, see
“Navigating through menus” (page
2
0).
Screen Format
Selects a screen mode for displaying input from your PC.
“Normal”: Displays the pict
u
re in its original size.
“Full1”: Enlarges the picture to fill the display area, keeping its original horizontal-
to-vertical aspect ratio.
“Full2”: Enlarges the picture to fill the display area.
Reset
Resets the PC settings except “Screen Format” and “Power Management” to the
factory settings.
Auto Adjustment
Automatically adjusts the display position and phase of the picture when the TV
receives an input signal from the connected PC.
Tip
Auto Adjustment may not work well with certain
input signals. In such cases, manually adjust
“Phase”, “Pitch”, “Horizontal Shift” and “Vertical Shift”.
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift
Adjusts the horizontal position of the picture for each screen format.
Vertical Shift
Adjusts the vertical position of the picture for each screen format.
Power Management
Switches the TV to standby mode if no
signal is received for 30 seconds.
Click on the first or last page to see other KDL-32V2500 / KDL-40V2500 / KDL-46V2500 service manuals if exist.