RM-PJAW15, RM-PJHW15J, RM-PJVW70, VPL-HW10, VPL-HW15 - Sony Projector Service Manual (repair manual). Page 13

Read Sony RM-PJAW15 / RM-PJHW15J / RM-PJVW70 / VPL-HW10 / VPL-HW15 Service Manual online

1-7
VPL-HW10
1-3-6. C Board-1
Remove it while
pressing the claw 
of the connector. 
Claw
3
 Remove the G board cover assembly
      in the direction of the arrow 
A
.
1
 Screw
     (BVTP 3 
12)
2
 Three claws
4
 Two screws
     (BVWHTP 3 
12)
5
 Lamp power 
     connector assembly
7
 Two fan connectors
6
 Six claws
harness
HB board
CN20
G board cover
A
![
 Press the 
     two claws. 
!=
 Three harnesses
Fuse connector assembly
!-
 Remove the fuse connector assembly 
     in the direction of the arrow 
B
.
Fuse connector assembly
!\
 Two harnesses
Connector
C board
CN101
From CN900 
on the QA board.
C board
CN100
TL board
CN60
0
 Loosen screw.
Marking is printed 
on the bottom. 
!]
 Lead with connector 
     (LVDS)
B
To the D.C. fan cover 
(VPL-HW10), or 
chassis (VPL-HW15).
8
 Screw
     (PSW 3 
8)
9
 GND wire 
     harness
When installing the GND wire harness, 
insert the GND wire harness in between 
the optical unit and the bottom cover 
assembly. 
The lug terminal should not 
protrude exceeding the chassis.
Bottom cover 
assembly
Optical unit
Rear Side
of Unit
Pull the GND harness front to
give tension.
D.C. fan cover (VPL-HW10), or 
chassis (VPL-HW15)
Page of 127
Display

Click on the first or last page to see other RM-PJAW15 / RM-PJHW15J / RM-PJVW70 / VPL-HW10 / VPL-HW15 service manuals if exist.