DCR-PC109, DCR-PC109E (serv.man7) - Sony Movie Service Manual (repair manual). Page 2

— 2 —

DCR-PC109/PC109E

Before perform the camera system adjustments (except for “54MHz
(PC109E)/66MHz (PC109) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.

Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.

Before perform the camera system adjustments (except for “54MHz
(PC109E)/66MHz (PC109) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.

0. Change data in replacing LENS
When replacing the following LENS, change the data as below too.
-LENS

841A (CZ) BLOCK ASSY (A-7112-105-A)

-DATA CHANGE

Page : 1E, Address : B9, Data : 10

r

Page : 1E, Address : B9, Data : 04

Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.

Page 6-21

 : Added portion

Page 6-60

 : Changed portion

Using method:
1)

The past self-diagnosis codes are displayed at addresses: BC to C6. Refer to the following table.

Using method:
1)

The past self-diagnosis codes are displayed at addresses: BC to C6. Refer to “SELF-DIAGNOSIS CODE TABLE” for detail of the
self-diagnosis code.