Read Sony SDM-G96D / SDM-G96X Service Manual online
SDM-G76D
: AEP
SDM-G96D
: AEP,WB
SDM-G96X
: AEP
Service Manual
TFT LCD COLOR COMPUTER DISPLAY
2
SDM-G76D , SDM-G96D/X (E)
CONTENTS
Page
PRECAUTIONS
3
SPECIFICATIONS
4
TIMING CHART
5
SIGNAL CONNECTOR PIN
6
EDID data for G76D
7
EDID data for G96D/G96X 8
OPERATING INSTRUCTIONS 9
SERVICE MODE
10
DISASSEMBLY PROCESS
11, 12
SPEAKER EXCHANGE PROCESS 13
BLOCK DIAGRAM
14, 15
ADJUSTMENT
16
WIRING DIAGRAM
17
SERIAL NUMBER LIST
17
EXPLODED VIEW
18
REPLACEMENT PARTS LIST
19, 20
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT.
• There are some special components used in LCD
monitor that are important for safety.
These parts are marked on the schematic diagram
and the replacement parts list.
It is essential that these critical parts should be
replaced with the manufacturer’s specified parts to
prevent electric shock, fire or other hazard.
These parts are marked on the schematic diagram
and the replacement parts list.
It is essential that these critical parts should be
replaced with the manufacturer’s specified parts to
prevent electric shock, fire or other hazard.
• If you want to replace with the new backlight (CCFL)
or inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit
about 650Vrms.
because high voltage appears at inverter circuit
about 650Vrms.
• Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
original parts and labor guarantee.
• Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and may
burn or take fire.
burn or take fire.
TAKE CARE DURING HANDLING THE LCD MODULE WITH
BACKLIGHT UNIT.
• Must mount the module using mounting holes arranged
in four corners.
Leakage Current Hot Check Circuit
• Do not press on the panel, edge of the frame strongly or
electric shock as this will result in damage to the
screen.
screen.
• Do not scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
• Protect the module from the ESD as it may damage the
electronic circuit (C-MOS).
• Make certain that treatment person’s bodies are
grounded through wrist band.
• Do not leave the module in high temperature and in
areas of high humidity for a long time.
• The module not is exposed to the direct sunlight.
• Avoid contact with water as it may a short circuit within
the module.
• If the surface of panel becomes dirty, please wipe it off
with a soft material. (Cleaning with a dirty or rough
cloth may damage the panel.)
cloth may damage the panel.)
3
SDM-G76D , SDM-G96D/X (E)
SPECIFICATIONS
1. LCD CHARACTERISTICS
Type : TFT Color LCD Module
Active Display Area : 337.92(H) x 270.336(V) - G76D
Active Display Area : 337.92(H) x 270.336(V) - G76D
(mm) : 376.32(H) x 301.06(V) - G96D/X
Pixel Pitch (mm) : 0.264 (H) x 0.264 (V) - G76D
: 0.294 (H) x 0.294 (V) - G96D/X
Size (mm) : 358.5(W) x 296.5(H) x 17.0(D)
- SDM-G76D
: 396(W) x 324(H) x 18(D)
- SDM-G96D/X
Color Depth : 16.2M colors - SDM-G76D
: 16.2M colors - SDM-G96D/X
Electrical Interface : Dual channel LVDS
Surface Treatment : Glare treatment, Hard-coating (2H)
Operating Mode : Normally White
Backlight Unit : 4-CCFL
Surface Treatment : Glare treatment, Hard-coating (2H)
Operating Mode : Normally White
Backlight Unit : 4-CCFL
(Cold Cathode Fluorescent Lamp)
2. OPTICAL CHARACTERISTICS
2-1. Viewing Angle by Contrast Ratio
> 10
SDM-G76D
Left : -60°(min), -70°(Typ) Right : +60°(min), +70°(Typ)
Top :+60°(min), +70°(Typ) Bottom : -50°(min), -60°(Typ)
Top :+60°(min), +70°(Typ) Bottom : -50°(min), -60°(Typ)
SDM-G96D/X
Left : -65°(min), -70°(Typ) Right : +65°(min), +70°(Typ)
Top :+70°(min), +75°(Typ) Bottom : -55°(min), -60°(Typ)
Top :+70°(min), +75°(Typ) Bottom : -55°(min), -60°(Typ)
2-2. Luminance :
420 cd/m
2
(Typ) - SDM-G76D
420 cd/m
2
(Typ) - SDM-G96D/X
2-3. Contrast Ratio :
500:1 (Typ) -SDM-G76D
550:1 (Typ) -SDM-G96D/X
550:1 (Typ) -SDM-G96D/X
3. SIGNAL (Refer to the Timing Chart)
3-1. Sync Signal
Type : Separate Sync, Composite Sync,
SOG (Sync On Green), Digital
SOG (Sync On Green), Digital
3-2. Video Input Signal
1) Type: R, G, B Analog
2) Voltage Level: 0~0.70 V (±5%)
2) Voltage Level: 0~0.70 V (±5%)
a) Color 0, 0: 0 Vp-p
b) Color 7, 0: 0.467 Vp-p
c) Color 15, 0: 0.714 Vp-p
b) Color 7, 0: 0.467 Vp-p
c) Color 15, 0: 0.714 Vp-p
3) Input Impedance : 75
Ω
3-3. Operating Frequency
Analog Digital
Horizontal: 28 ~ 80kHz 28 ~ 64kHz
Vertical: 56 ~ 75Hz 60Hz
Dot Clock: < 135MHz < 108MHz
Vertical: 56 ~ 75Hz 60Hz
Dot Clock: < 135MHz < 108MHz
4. Max. Resolution
Analog : 1280 x 1024 / 75Hz
Digital : 1280 x 1024 / 60Hz
Digital : 1280 x 1024 / 60Hz
5. POWER SUPPLY
5-1. Power: AC 100~240V, 50/60Hz, 1.0A
5-2. Power Consumption
MODE
H/V SYNC VIDEO
POWER CONSUMPTION
LED COLOR
less than 48W (G96D)
less than 53W (G96X)
less than 45W (G76D)
STAND-BY
OFF/ON
OFF
less than 1W
AMBER
SUSPEND
ON/OFF
OFF
less than 1W
AMBER
DPMS OFF
OFF/OFF
OFF
less than 1W
AMBER
POWER S/W OFF
-
-
less than 1W
OFF
GREEN
ACTIVE
ON/ON
POWER ON (NORMAL)
6. ENVIRONMENT
6-1. Operating Temperature:
5°C~35°C (41°F~95°F)
6-2. Relative Humidity:
10%~80% (Non-condensing)
7. DIMENSIONS
SDM-G76D
Width: 383.5 mm (15.3'')
Depth: 163 mm (6.5'')
Height: 404.5 mm (16.2'')
Depth: 163 mm (6.5'')
Height: 404.5 mm (16.2'')
SDM-G96D/X
Width: 422.5mm (16.9'')
Depth: 163 mm (6.5'')
Height: 435.5 mm (17.4”)
Depth: 163 mm (6.5'')
Height: 435.5 mm (17.4”)
8. WEIGHT
SDM-G76D
Net. Weight: 5.03 kg
Gross Weight: 6.70 kg
Gross Weight: 6.70 kg
SDM-G96D
Net. Weight : 5.52kg
Gross Weight: 7.63kg
Gross Weight: 7.63kg
SDM-G96X
Net. Weight : 5.87kg
Gross Weight: 8.02kg
Gross Weight: 8.02kg
4
SDM-G76D , SDM-G96D/X (E)